Terminal Panel - NEC MultiSync ME501 User Manual

Terminal Panel

A
AC IN Connector
Connects with the supplied power cord.
B
Main Power Switch
On/Off switch to turn main power ON/OFF.
C
USB Port
USB storage device reader for use with the Media Player.
Power supply for USB devices.
For the USB port information, please see
USB Device" on page 32.
D
DisplayPort IN
DisplayPort signals input.
E
HDMI IN (HDMI1 (ARC)/HDMI2)
HDMI signals input.


NOTEN:
• HDMI1 terminal also supports ARC (Audio
Return Channel) for audio output.

• ARC sends the monitor's sound to audio
equipment with an HDMI1 ARC connector.

• Use the included ARC-supported HDMI cable.
The audio equipment will output the monitor's
audio.

• The audio equipment can be controlled with the
included remote control.
HDMI
"Connecting a
USB
DisplayPort IN
HDMI IN (ARC) HDMI IN
F
LAN Port IN (RJ-45)
Connect to LAN in order to manage and control the monitor
over the network. See
G
AUDIO OUT
Audio signal output from DisplayPort and HDMI to an
external device (stereo receiver, amplifier, etc.).


NOTEN: This connector is not a headphone terminal.
H
REMOTE
Use the optional sensor unit by connecting it to your monitor.

NOTEN:
Do not use this connector unless specified.
I
Option Board Slot
Slot for installation of an Intel
(Intel SDM).
®

NOTEN:
Please contact your supplier for a list of compatible
Option Boards.
J
Raspberry Pi Compute Module Slot
Slot for installing a Raspberry Pi Compute Module Interface
Board and Raspberry Pi Compute Module. See


CAUTIONN:
English−22
LAN IN
AUDIO OUT
REMOTE
page 53.
Smart Display Module
®
Installation must be performed by a
qualified technician. Do not attempt to
install a Compute Module Interface Board
and Raspberry Pi Compute Module by
yourself.
page 73.