Sony LMD-A240 Operating Instructions Manual page 29

Submenu Setting
[Metadata1] to Assigns the camera metadata to be
[Metadata12] displayed on the screen. You can assign
from the following:
[Iris F-Number]

[Iris T-Number]

[Focus Position]

[Focus Ring Position]

[Macro Setting]

[Lens Zoom (35mm)]

[Lens Zoom (focal)]

[Zoom Ring Position]

[Optical Extender Mag]

[Lens Attribute]

[Neutral Density Filter]

[Capture Frame Rate]

[Shutter Speed (Angle)]

[Shutter Speed (Time)]

[Camera Master Gain]

[ISO Sensitivity]

[Electrical Extender Mag]

[AWB Mode]

[White Balance]

[Capture Gamma]

[Monitoring Base Curve]

[Monitoring Descript]

[Focus Distance(Cooke)]

[Hyperfocal D. (Cooke)]

[Displayed Rows] Sets the display row number.
[1row]: Displays four items of the

[2rows]: Displays eight items of the

[3rows]: Displays 12 items of the

[Position] Sets the display position of the
metadata. Select [Top] or [Bottom].
[Units] Sets the unit of distance. Select [Feet] or
[Meter].
[WFM/ALM/Vector (waveform monitor,
audio level meter, and vectorscope) Setting]
metadata in a row.
metadata in two rows.
metadata in three rows.
Submenu Setting
[Display] Select [On] to display the [WFM]
(waveform monitor), [ALM] (audio
level meter), or [Vector] (Vectorscope);
or [Off] not to display.
[WFM/ALM/Vector] [WFM]: Displays the waveform

monitor.
[ALM]: Displays the audio level

meter.
[Vector]: Displays the vectorscope.

When [WFM] is selected, the waveform
and audio level are displayed. When
YCbCr format signal is input, the Y
signal waveform is displayed. When
RGB format signal is input, the G signal
waveform is displayed. When [ALM] is
selected, the audio level is displayed in
eight channels.
When [Vector] is selected, the color
component of the image signal and the
audio levels are displayed.
When SDI signal is input, the audio
levels for channels selected in [SDI
Audio Setting] are displayed.
Note
The vectorscope does not function
while either the RGB signal or the ITU-
R BT.2020 signal is input.
Each display type is illustrated below.
(The waveform percentage and audio
level units/values do not appear on the
display.)
When [WFM] is selected
Waveform
Audio level
Channel number
29
Adjustment Using the Menus