Preventing The Monitor From Toppling Over (Only When Placing On A Tv Stand) - Sony KXL-40ZX1 Bravia Operating Instructions Manual

Preventing the Monitor from Toppling
Over (Only When Placing on a TV
Stand)
Prepare the following item:
– Stand Support adaptor (supplied with SS-TBL700
Speaker System)
1
Remove the screw from the Table-Top Stand.
2
Secure the Stand Support adaptor to the
Table-Top Stand.
3
Attach a rope or chain to the adaptor, and then
secure it to the TV stand (not supplied). Make
sure that there is no excess slack in the rope or
chain.
8
GB
Install a wood screw (4 mm in diameter, not
1
supplied) in the TV stand.
Install a machine screw (M6 × 12-15, not
2
supplied) into the screw hole of the monitor.
Tie the wood screw and the machine screw with
3
a strong cord.