Majestic MER42N Installation Manual page 77

PLACE LOG #4 IN NOTCH PLACE LOG #4 IN NOTCH
4 4
7 IN. 7 IN.
Figure 6 Place Log #4
Log #4: Place the top end of Log #4 on the notch located on Log #1 as shown in Figure 3 and Figure 6. Place the bottom
of Log #4 seven inches from the bottom of Log #3 as shown in Figure 6.
Log #5: Place the top end of Log #5 on the notch located on Log #1. See Figure 3 and Figure 7. The bottom end of Log #
5 rests on the base refractory as shown above. The space between the bottom right side of Log #3 and the bottom left side
of Log #5 should measure 13-1/2 inches as shown in Figure 7.
4 4
GROOVE FOR LOG #7 GROOVE FOR LOG #7
3 3
2 2
LOG #6 FLUSH WITH LOG #5 LOG #6 FLUSH WITH LOG #5
Figure 8 Place Log #6
Log #6: Log # 6 rests on the flat spot of Log #2 as shown in Figures 7 and 8. The top end of Log #6 is positioned flush with
Log #5 shown in Figure 8. Position other end of Log # 6 as shown in Figure 8.
Majestic • MER36N, MER36L, MER42N, MER42L Installation Manual • 2595-980 Rev. B • 5/23
1 1
3 3
2 2
1 1
6 6 5 5
LOG #2 AND LOG #3 ALIGNED, BUT DO NOT TOUCH LOG #2 AND LOG #3 ALIGNED, BUT DO NOT TOUCH
PLACE LOG #5 IN NOTCH PLACE LOG #5 IN NOTCH
1 1
3 3
13.5 IN. 13.5 IN.
Figure 7 Place Log #5
5 5
2 2
FLAT SPOT FOR LOG #6 FLAT SPOT FOR LOG #6
77