Table of Contents
Advertisement
C. Appliance Location and Clearances to
Combustibles
WARNING! Risk of Fire or Burns! Provide adequate
clearance around air openings and for service access.
Due to high temperatures, the appliance should be lo-
cated out of traffic and away from furniture and draperies.
When selecting a location for the appliance it is important
to consider the required clearances to walls and allow suf-
ficient clearance for heat management systems venting.
Refer to Figure 3.6 for Heat-Zone-Gas and Heat-Out-Gas
heat management systems.
Refer to Figures 3.11-3.13 for information regarding fram-
ing when the Passive Heat Kit is installed. Install the Pas-
sive Heat Kit per the instructions provided with the kit.
NOTICE: Illustrations reflect typical installations and are
FOR DESIGN PURPOSES ONLY. Illustrations/diagrams
are not drawn to scale. Actual installation may vary due to
individual design preference.
Majestic • MER36N, MER36L, MER42N, MER42L Installation Manual • 2595-980 Rev. B • 5/23
NOTICE: Allow 18 inches minimum clearance
on top of appliance for venting of heat
management system.
18 IN. MIN.
Figure 3.6
Clearance for Heat Management System
17
Advertisement
Table of Contents
