Table of Contents
Advertisement
Component Tray
The electrical components are installed on the compo-
nent tray, noted in Figure 8.3. The components may be
removed if necessary. Once components are reinstalled,
ensure the electrical components are connected properly.
To remove the IFT-ECM, gently pull up on the ECM, lifting
it enough to clear the tabs (A) and disengage from tab B.
A
B
Figure 8.3 Electrical Component Tray
Majestic • MER36N, MER36L, MER42N, MER42L Installation Manual • 2595-980 Rev. B • 5/23
58
Advertisement
Table of Contents
