1. Manuals
  2. Brands
  3. protech Manuals
  4. Touch Panel
  5. SP-6110
  6. User manual

protech SP-6110 User Manual

Intel® atom™ e640t/e680t 10.4”/12.1”/8.4” fanless panel pc with vga/audio/2lan
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
USER'S
MANUAL
SP-6110/6112/6118
SP-6110/6112/6118
®
Intel
Atom™ E640T/E680T
10.4"/12.1"/8.4" Fanless Panel PC
With VGA/Audio/2LAN
M1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SP-6110 and is the answer not in the manual?

Questions and answers

Related Manuals for protech SP-6110

Summary of Contents for protech SP-6110

  • Page 1 USER’S MANUAL SP-6110/6112/6118 ® Intel Atom™ E640T/E680T 10.4”/12.1”/8.4” Fanless Panel PC With VGA/Audio/2LAN SP-6110/6112/6118...
  • Page 2 SP-6110/6112/6118 ® ™ Intel Atom E640T/E680T 10.4”/12.1”/8.4” Fanless Panel PC With VGA/Audio/2LAN COPYRIGHT NOTICE All trademarks and registered trademarks mentioned herein are the property of their respective owners. This manual is copyrighted Dec. 2013. You may not reproduce or transmit in any form or by any means, electronic, or mechanical, including photocopying and recording.
  • Page 3 FCC NOTICE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

  • Page 4: Table Of Contents

    Contents TABLE OF CONTENTS CHAPTER 1 INTRODUCTION About This Manual..............System Illustratio ............... System Specifications..............Safety Precautions..............1-11 CHAPTER 2 SYSTEM CONFIGURATION Jumper & Connector Quick Reference Table......Component Locations..............How to Set the Jumpers.............. COM Port Connector……..…………………………….... COM RI & Voltage Selection............ RS232/422/485 (COM2) Selection……..……………………..
  • Page 5 4-38 Security………………………………………………………... 4-41 Save & Exit……………………………………………………. 4-42 APPENDIX A SYSTEM ASSEMBLY Exploded Diagram for SP-6110 (CPT)/6112/6118 System....Exploded Diagram for SP-6110 System………........Exploded Diagram for SP-6110 CPT System………………….... A-12 Exploded Diagram for SP-6112 System………........A-18 Exploded Diagram for SP-6118 System………........

  • Page 6: Chapter 1 Introduction

    CHAPTER INTRODUCTION This chapter gives you the information for SP-6110/6112/6118. It also outlines the System specification. Section includes: About This Manual System Specifications Safety Precautions Experienced users can skip to chapter 2 on page 2-1 for Quick Start. Page:1-1...

  • Page 7: About This Manual

    Thank you for purchasing our SP-6110/6112/6118 Intel Atom™ E640T/E680T Fanless Panel PC with VGA/Audio/2LAN. SP-6110/6112/6118 provides faster processing speed, greater expandability and can handle more task than before. This manual is designed to assist you how to install and set up the system. It contains four chapters.

  • Page 8: System Illustratio

    Chapter 1 Introduction 1-2. SYSTEM ILLUSTRATION SP-6110 & SP-6110 CPT Front View Rear View M4*8 (For cutout wall) 48.2 213.2 202.8 228.8 M4*4 (For Visa ARM) 212.8 277.6 Top View 251.6 217.5 M3 (X2) I/O View M3 (X2) LAN1 LAN2 USB...
  • Page 9 Chapter 1 Introduction Side View - SP-6110 Side View - SP-6110 CPT 23.2 M3 (X2) 23.2 M3 (X2) 140.6 140.6 172.8 172.8 Unit: mm ′ Page: 1-4 SP-6110/6112/6118 USER S MANUAL...
  • Page 10 Front View Rear View M4 *10 (For cutout wall) 188.6 218.5 M4 *4 (For Visa ARM) Top View 216.5 M3 (X3) I/O View M3 (X3) LAN1 LAN2 USB COM1 COM2 VCC GND Unit: mm ′ Page: 1-5 SP-6110/6112/6118 USER S MANUAL...
  • Page 11 Chapter 1 Introduction Side View 23.2 M3 (X2) 140.6 Unit: mm ′ Page: 1-6 SP-6110/6112/6118 USER S MANUAL...
  • Page 12 Front View Rear View M4 * 4 32.8 130.8 184.6 172.2 172.4 246.8 M3 * 10 76.2 228.7 Top View 217.5 M3 * 2 10.4 I/O View LAN1 LAN2 USB COM1 COM2 Unit: mm ′ Page: 1-7 SP-6110/6112/6118 USER S MANUAL...
  • Page 13 Chapter 1 Introduction Side View 11.3 17.4 Unit: mm ′ Page: 1-8 SP-6110/6112/6118 USER S MANUAL...

  • Page 14: System Specifications

    Net Weight SP-6110: 3.5 kg SP-6112: 4.1 kg SP-6118: 2.9 kg Dimension (W x H x D) SP-6110: 277.6 x 228.8 x 71 mm SP-6112: 324 x 246 x 71 mm SP-6118: 246.8 x 184.6 x 70 mm Certificate FCC/CE...
  • Page 15 Chapter 1 Introduction Environment Operation Temp. HDD: 0 ~ 45°C (32 ~ 113°F) CFast card: -20 ~ 60°C (-4 ~ 140°F) Storage Temp. -20 ~ 60°C (-4 ~ 140°F) Humidity 20 ~ 90% ′ Page: 1-10 SP-6110/6112/6118 USER S MANUAL...

  • Page 16: Safety Precautions

    Always disconnect power when the system is not in use. Disconnect power when you change any hardware devices. For instance, when you connect a jumper or install any cards, a surge of power may damage the electronic components or the whole system. ′ Page: 1-11 SP-6110/6112/6118 USER S MANUAL...
  • Page 17 CHAPTER HARDWARE CONFIGURATION ** QUICK START ** Helpful information describes the jumper & connector settings, and component locations. Section includes: Jumper & Connector Quick Reference Table Component Locations Configuration and Jumper settings Connector’s Pin Assignments Page 2-1...

  • Page 18: Jumper & Connector Quick Reference Table

    Universal Serial Bus Connector USB1 LAN Connector LAN1, LAN2 Audio Connector JLINE_OUT CFast Connector JCFAST1 CFast Voltage Selection Wide Range Power Mode Setting JP12, JP13 AT/ATX Power Selection JP10 Battery Function Selection JBAT1 ′ Page: 2-2 SP-6110/6112/6118 USER S MANUAL...
  • Page 19 BAT1 JVDS1 Battery JCFAST1 JLED1 JP14 S7 PC1 PC17 FAN1 JP12 JLINE_OUT JP13 SATA1 M_PCIE1 LPC1 HDD_POWER1 JP5 JP3 JP10 COM1 COM2 VGA1 LAN1 LAN2 USB1 CN_POWER SB-8120 Connectors, Jumpers and Components Locations ′ Page: 2-3 SP-6110/6112/6118 USER S MANUAL...
  • Page 20 PIN1 & PIN2 to create one setting by shorting. You can either connect PIN2 & PIN3 to create another setting. The same jumper diagrams are applied all through this manual. The figure below shows what the manual diagrams look and what they represent. ′ Page: 2-4 SP-6110/6112/6118 USER S MANUAL...
  • Page 21 Jumper Block looks like this JUMPER SETTINGS 2 pin Jumper close(enabled) Looks like this 3 pin Jumper 2-3 pin close(enabled) Looks like this Jumper Block 1-2 pin close(enabled) Looks like this ′ Page: 2-5 SP-6110/6112/6118 USER S MANUAL...
  • Page 22 COM_TXD COM_DTR COM_DSR COM_RTS COM_CST COM_RI COM2: COM2 Connector, selectable as RS-232/422/485. The pin assignments are as follows: ASSIGNMENT RS-232 RS-422 RS-485 COM2_DCD# 485- COM2 COM2_RX 485+ COM2_TX COM2_DTR# COM2_DSR# COM2_RTS# COM2_CTS# COM2_RI# ′ Page: 2-6 SP-6110/6112/6118 USER S MANUAL...
  • Page 23 The selections are as follows: SELECTION JUMPER SETTINGS JUMPER ILLUSTRATION Note: Manufacturing Default is RI. JP3: COM2 RI & Voltage Selection The selections are as follows: SELECTION JUMPER SETTINGS JUMPER ILLUSTRATION Note: Manufacturing Default is RI. ′ Page: 2-7 SP-6110/6112/6118 USER S MANUAL...
  • Page 24 JP4 : COM2 RS485 DIR Control Selection, used to set the COM2 function. The jumper settings are as follows: SELECTION JUMPER SETTINGS JUMPER ILLUSTRATION Auto RS485 Manual Note: Manufacturing default is Auto RS485. ′ Page: 2-8 SP-6110/6112/6118 USER S MANUAL...
  • Page 25 *To clear CMOS data, you must power off the system, set the jumper to “Clear CMOS” as illustrated above, and then power on the system. After five to six seconds, turn off the system, set the jumper back to “Normal” and turn on the system again. ′ Page: 2-9 SP-6110/6112/6118 USER S MANUAL...
  • Page 26 Battery unused JBAT1 JBAT1 JBAT1 JBAT1 Battery used JBAT1 JBAT1 JBAT1 JBAT1 Note: Manufacturing Default – 3.3V 2-10. EXTERNAL BATTERY CONNECTOR BAT1: Battery Connector The pin assignments are as follows: ASSIGNMENT VBAT+ VBAT BAT1 ′ Page: 2-10 SP-6110/6112/6118 USER S MANUAL...
  • Page 27 USB3- VCC5 VCC12 USB2- USB3+ USB4- HDD_LED USB2+ USB4+ POWER_ LED+ USB_OC1J LVDS_ VCC3.3 BKLTEN VCC12 USB_OC2J 2-12. SYSTEM RESET CONNECTOR JP8: System Reset Connector. The pin assignments are as follows: ASSIGNMENT SYS_RSTJ ′ Page: 2-11 SP-6110/6112/6118 USER S MANUAL...
  • Page 28 2-14. LVDS CONNECTOR LVDS1: LVDS Connector The pin assignments are as follows: ASSIGNMENT ASSIGNMENT LVDS_VCC LVDS0_CLK+ (Odd) LVDS0_CLK-(Odd) LVDS0_D2+ (Odd) LVDS0_D2-(Odd) 30 29 LVDS0_D1+ (Odd) LVDS0_D1-(Odd) LVDS1 LVDS0_D0+ (Odd) LVDS0_D0-(Odd) LVDS0_D3+ (Odd) LVDS0_D3-(Odd) LVDS_VCC LVDS_VCC ′ Page: 2-12 SP-6110/6112/6118 USER S MANUAL...

  • Page 29: Vga Connector

    LVDS_VCC3 1-3, 2-4 LVDS_VCC5 3-5, 4-6 Note: Manufacturing Default – LVDS_VCC3 2-16. VGA CONNECTOR VGA1: VGA Connector The pin assignments are as follows: ASSIGNMENT ASSIGNMENT VCC5 GREEN1 VGA1 BLUE DDC_DATA HSYNC VSYNC DDC_CLK ′ Page: 2-13 SP-6110/6112/6118 USER S MANUAL...

  • Page 30: Serial Ata Connector

    HDD_POWER1: Serial ATA Power Connector The pin assignments are as follows: ASSIGNMENT VCC5 HDD_POWER1 2-19. UNIVERSAL SERIAL BUS CONNECTOR USB1: Universal Serial Bus Connector The pin assignments are as follows: ASSIGNMENT USB_VCC5 USB1 USBN USBP ′ Page: 2-14 SP-6110/6112/6118 USER S MANUAL...

  • Page 31: Lan Connector

    No LAN switch/ hub connected. Right Side LED Yellow Color Blinking LAN Message Active No LAN Message Active 2-21. AUDIO CONNECTOR JLINE_OUT: Audio Line Out Connector The pin assignments are as follows: ASSIGNMENT LINE_LEFT JLINE_OUT LINE_RIGHT ′ Page: 2-15 SP-6110/6112/6118 USER S MANUAL...

  • Page 32: Cfast Connector

    Chapter 2 Hardware Configuration 2-22. CFAST CONNECTOR JCFAST1: CFast Connector The pin assignments are as follows: JCFAST1 S7 PC1 PC17 ASSIGNMENT ASSIGNMENT SATA_TXP0 SATA_TXN0 SATA_RXN0 PC10 SATA_RXP0 PC11 PC12 PC13 3.3V/5V PC14 3.3V/5V PC15 PC16 PC17 ′ Page: 2-16 SP-6110/6112/6118 USER S MANUAL...

  • Page 33: Cfast Voltage Selection

    2-24. WIDE RANGE POWER MODE SETTING JP12: Power Mode Setting. The selections are as follows: SELECTION JUMPER SETTINGS JUMPER ILLUSTRATION Default JP12 JP13: Power Mode Setting. The selections are as follows: SELECTION JUMPER SETTINGS JUMPER ILLUSTRATION Default JP13 ′ Page: 2-17 SP-6110/6112/6118 USER S MANUAL...

  • Page 34: Battery Function Selection

    2-26. BATTERY FUNCTION SELECTION JBAT1: Battery Function Selection The selections are as follows: SELECTION JUMPER SETTINGS JUMPER ILLUSTRATION Battery unused JBAT1 JBAT1 JBAT1 JBAT1 Battery JBAT1 JBAT1 JBAT1 JBAT1 Note: Manufacturing Default – Battery ′ Page: 2-18 SP-6110/6112/6118 USER S MANUAL...

  • Page 35: Chapter 3 Software Utilities

    CHAPTER SOFTWARE UTILITIES This chapter comprises the detailed information of VGA driver, LAN driver, and Sound driver. Section includes: Introduction ® Intel IOH Driver Utility ® Intel Chipset Software Installation Utility Graphics Driver Utility LAN Driver Utility SOUND Driver Utility Touch Driver Utility Page: 3-1...

  • Page 36: Introduction

    Enclosed with our SP-6110/6112/6118 package, you will find a CD ROM disk containing all types of drivers we have. As a SP-6110/6112/6118 user, you will only need some of files contained in the CD ROM disk, please take note of the following...
  • Page 37 Open the IOH folder and copy the contents of this archive onto a floppy disk. At the beginning of the Windows XP installation, press F6 to install a IOH drivers. When prompted to insert the media (floppy disk), press Enter to load to your system. ′ Page:3-3 SP-6110/6112/6118 USER S MANUAL...

  • Page 38: Intel Chipset Software Installation Utility

    Execute the application with administrative privileges.( or unzip the file to perform the installation.) Follow the instructions on the screen to complete the installation. Once installation is completed, shut down the system and restart in order for the changes to take effect. ′ Page:3-4 SP-6110/6112/6118 USER S MANUAL...

  • Page 39: Graphics Driver Utility

    Chapter 3 Software Utilities 3-4. Graphics DRIVER UTILITY ® The Intel Embedded Media and Graphics driver works with our SP-6110/6112/6118 system to support CRT and LCD Panel display. The following illustration briefly shows you the content of Graphics driver in D:\Driver\Platform\(OS)\Graphics.

  • Page 40: Lan Driver Utility

    Chapter 3 Software Utilities 3-5. LAN DRIVER UTILITY 3-5-1. Introduction The SP-6110/6112/6118 is enhanced with LAN function that can support various network adapters. The content of the LAN driver is found as follows: 1. Win XP Series 2. Win 7 Series For more details on Installation procedure, please refer to Readme.txt file...

  • Page 41: Sound Driver Utility

    Click on [Next] to continue the procedure. If the Windows popup "Windows can't verify the publisher of this driver software" message, press "Install this driver software anyway" to continue the installation. Finally, select to restart the system and press [Finish] to complete the installation. ′ Page:3-7 SP-6110/6112/6118 USER S MANUAL...

  • Page 42: Touchscreen Driver Utility

    Execute the application with administrative privileges (or unzip the file to perform the installation.) Follow the on-screen instructions to complete the installation. Once installation is completed, shut down the system and restart for the changes to take effect. ′ Page:3-8 SP-6110/6112/6118 USER S MANUAL...

  • Page 43: Introduction

    CHAPTER BIOS SETUP This chapter shows how to set up the AMI BIOS. Section includes: Introduction Entering Setup Main Advanced Chipset Boot Security Save & Exit Page: 4-1...
  • Page 44 Chapter 4 AMI BIOS Setup 4-1. INTRODUCTION The system SP-6110/6112/6118 uses an AMI (American Megatrends Incorporated) Aptio BIOS that is stored in the Serial Peripheral Interface Flash Memory (2MB SPI Flash) and can be updated. The SPI Flash contains the BIOS (Basic Input Output System) setup menu, Power-on Self-test (POST), the PCI auto-configuration utility, LAN EEPROM information, and Plug and Play support.
  • Page 45 The BIOS setup menu is accessible by pressing the <Del> or <F2> key on keyboard during the POST stage, right before the operating system is loading. All the settings are described in chapter to be followed. ′ Page: 4-3 SP-6110/6112/6118 USER S MANUAL...
  • Page 46 <F2> or <Del> key (the one that shares the decimal point at the bottom of the number keypad) to access the setup menu. In a moment, the main menu of the Aptio Setup Utility will appear on the screen: ′ Page: 4-4 SP-6110/6112/6118 USER S MANUAL...
  • Page 47 You may move the cursor by up/down keys to highlight the individual menu items. As you highlight each item, a brief description of the highlighted selection will appear at the bottom of the screen. ′ Page: 4-5 SP-6110/6112/6118 USER S MANUAL...
  • Page 48 System Date month, day, year Specifies the current date. System Time hour, minute, second Specifies the current time. Access Level no changeable options Displays security level currently in use. ′ Page: 4-6 SP-6110/6112/6118 USER S MANUAL...
  • Page 49 Displays the E6xx processor stepping. Displays PMIC (Power Management PUNIT Build Date no changeable options IC) date of build. PUNIT Build Displays PMIC (Power Management no changeable options Time IC) time of build. ′ Page: 4-7 SP-6110/6112/6118 USER S MANUAL...
  • Page 50 ACPI Settings sub-menu Enters menu to set ACPI option. sub-menu All processor related options menu. Configuration SDIO sub-menu SDIO device configuration section. Configuration sub-menu Enters menu to configure USB options. Configuration ′ Page: 4-8 SP-6110/6112/6118 USER S MANUAL...
  • Page 51 Chapter 4 AMI BIOS Setup BIOS Setting Options Description/Purpose Watchdog Timer sub-menu Section to configure Watchdog Timer. Configuration Hardware Monitor Options for NCT7802Y HW monitor sub-menu NCT7802Y chip. Super IO sub-menu Serial ports configuration section. F81216AU ′ Page: 4-9 SP-6110/6112/6118 USER S MANUAL...
  • Page 52 -64 PCI Bus Clocks -96 PCI Bus Clocks -128 PCI Bus Clocks PCI Latency Timer Sets PCI latency time. -160 PCI Bus Clocks -192 PCI Bus Clocks -224 PCI Bus Clocks -248 PCI Bus Clocks ′ Page: 4-10 SP-6110/6112/6118 USER S MANUAL...
  • Page 53 Maximum Read -512 Bytes the requestor. The device must not Request -1024 Bytes generate read requests with a size larger -2048 Bytes this value. -4096 Bytes ′ Page: 4-11 SP-6110/6112/6118 USER S MANUAL...
  • Page 54 L0 state and when -disabled in the recovery state. This mode Extended Synch -enabled provides external devices monitoring the link time to achieve bit symbol lock before the link enters L0 state and resumes communication. ′ Page: 4-12 SP-6110/6112/6118 USER S MANUAL...
  • Page 55 USB devices in Windows XP. Simply add DWORD entry named "USBBIOSx" with value 0 to location: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\usb\ Fore more details refer to Microsoft Support article KB 841858 at http://support.microsoft.com/kb/841858 ′ Page: 4-13 SP-6110/6112/6118 USER S MANUAL...
  • Page 56 Displays amount of Level 1 cache. L2 Cache RAM no changeable options Displays amount of Level 2 cache. Displays information about number of Processor Cores no changeable options physical cores in processor. ′ Page: 4-14 SP-6110/6112/6118 USER S MANUAL...
  • Page 57 Allows processor to enter its C2 idle Enhanced C2 -enabled state. -disabled Allows processor to enter its C3 idle Enhanced C3 -enabled state. -disabled Allows processor to enter its C4 idle Enhanced C4 -enabled state. ′ Page: 4-15 SP-6110/6112/6118 USER S MANUAL...
  • Page 58 Configures SDIO (Secure Digital Input Output) interface as following: Auto Mode selects mode in automatic -auto SDIO Access fashion. -DMA Mode DMA Mode allows use Direct Memory -PIO Access method. PIO Mode enables Programmed input/output method. ′ Page: 4-16 SP-6110/6112/6118 USER S MANUAL...
  • Page 59 OS hand-off synchronization capability. -1 sec USB transfer time- -5 sec Specifies time-out value for Control, -10 sec Bulk and Interrupt transfers. -20 sec Device reset time- -10 sec Specifies the value for device reset ′ Page: 4-17 SP-6110/6112/6118 USER S MANUAL...
  • Page 60 -Floppy Mass Storage emulation to use on available drive(s). -Forced FDD Devices: [drive(s)] Please note that the sector size of your -Hard Disk USB drive should be emulated device -CD-ROM native sector size. ′ Page: 4-18 SP-6110/6112/6118 USER S MANUAL...
  • Page 61 Chapter 4 AMI BIOS Setup 4-4-6. Advanced – Watchdog Timer Configuration [disabled] Watchdog Timer Configuration Screen BIOS Setting Options Description/Purpose -disabled Watchdog Timer Enables watchdog timer feature. -enabled ′ Page: 4-19 SP-6110/6112/6118 USER S MANUAL...
  • Page 62 Sets the desired value (in seconds) for WDT Preload 1 from 1 to 255 watchdog timer register 2. Reset at WDT -disabled Enables the board restart on watchdog Timeout -enabled timer timeout. ′ Page: 4-20 SP-6110/6112/6118 USER S MANUAL...
  • Page 63 Shows actual voltage of processor core Vcore no changeable options in volt. Vcc 5V no changeable options Monitors 5V section (in volt). Vcc 3.3V no changeable options Monitors 3.3 V section (in volt). ′ Page: 4-21 SP-6110/6112/6118 USER S MANUAL...
  • Page 64 Super IO Chip no changeable options model. F81216 Serial Port sub-menu Enters menu to configure serial port 1. 1 Configuration F81216 Serial Port sub-menu Enters menu to configure serial port 2. 2 Configuration ′ Page: 4-22 SP-6110/6112/6118 USER S MANUAL...
  • Page 65 -Auto -IO=3F8h; IRQ=4 -IO=3F8h; Specifies the base I/O address IRQ=3,4,5,6,7,10,11,12 and interrupt request for the Change Settings -IO=2F8h; serial port 1 if enabled. IRQ=3,4,5,6,7,10,11,12 -IO=3E8h; IRQ=3,4,5,6,7,10,11,12 -IO=2E8h; ′ Page: 4-23 SP-6110/6112/6118 USER S MANUAL...
  • Page 66 Chapter 4 AMI BIOS Setup BIOS Setting Options Description/Purpose IRQ=3,4,5,6,7,10,11,12 ′ Page: 4-24 SP-6110/6112/6118 USER S MANUAL...
  • Page 67 -Auto -IO=3F8h; IRQ=4 -IO=3F8h; Specifies the base I/O address IRQ=3,4,5,6,7,10,11,12 and interrupt request for the Change Settings -IO=2F8h; serial port 2 if enabled. IRQ=3,4,5,6,7,10,11,12 -IO=3E8h; IRQ=3,4,5,6,7,10,11,12 -IO=2E8h; ′ Page: 4-25 SP-6110/6112/6118 USER S MANUAL...
  • Page 68 Chapter 4 AMI BIOS Setup BIOS Setting Options Description/Purpose IRQ=3,4,5,6,7,10,11,12 ′ Page: 4-26 SP-6110/6112/6118 USER S MANUAL...
  • Page 69 Configuration items. South Bridge Enters menu to configure Chipset sub-menu audio, high precision timer Configuration and PCIe ports items. Enters menu to configure IOH Configuration sub-menu GPIO and SATA items. ′ Page: 4-27 SP-6110/6112/6118 USER S MANUAL...
  • Page 70 EMGD (Embedded Media and Version Graphics Driver), e.g. “1.10”. -enabled, 4MB -enabled, 8MB -enabled, 16MB Specifies the amount of main memory IGD Mode Select -enabled, 32MB assigned to Integrated Graphics Device. -enabled, 48MB -enabled, 64MB ′ Page: 4-28 SP-6110/6112/6118 USER S MANUAL...
  • Page 71 MSAC Mode memory aperture in function (please -enabled, 256MB Select note that option 512 MB isn’t -enabled, 128MB applicable for Microsoft Windows). Boot Display Enters menu to select active screen on sub-menu Configuration boot. ′ Page: 4-29 SP-6110/6112/6118 USER S MANUAL...
  • Page 72 In Auto mode, if VGA monitor is connected, clone mode Boot Display -Auto (both VGA display and LVDS panel Device -VGA show same content) is enabled. VGA option selects output to VGA monitor only. ′ Page: 4-30 SP-6110/6112/6118 USER S MANUAL...
  • Page 73 Enables or disables High Precision Even Timer -enabled Timer support. PCI Express Ports Enters menu to configure devices attached sub-menu Configuration on PCI Express interface. Section to configure additional option for PPM Config sub-menu Intel C-States feature. ′ Page: 4-31 SP-6110/6112/6118 USER S MANUAL...
  • Page 74 PCIe Port 1 -enabled Intel 82574 LAN1 -disabled Controls PCIe root port 2 (LAN2 device). on PCIe Port 2 -enabled -disabled Controls device on mini-PCIe (on PCIe root mini-PCIe slot -enabled port 3), if inserted. ′ Page: 4-32 SP-6110/6112/6118 USER S MANUAL...
  • Page 75 Enables popup mode in which CPU goes -disabled from C3 or C4 state into C2 (when disabled C-state POPUP -enabled it changes straight to C0); this is part of PPM (Processor Power Management). ′ Page: 4-33 SP-6110/6112/6118 USER S MANUAL...
  • Page 76 4-5-3. Chipset – IOH Configuration IOH Configuration Screen BIOS Setting Options Description/Purpose GPIO Enters menu to configure General sub-menu Configuration Purpose Input/Output. AHCI SATA Section to configure SATA and CFast sub-menu Configuration ports. ′ Page: 4-34 SP-6110/6112/6118 USER S MANUAL...
  • Page 77 GPIO 3 Enables or disables GPIO 3. -enabled -disabled GPIO 4 Enables or disables GPIO 4. -enabled -disabled GPIO 5 Enables or disables GPIO 5. -enabled GPIO 6 -disabled Enables or disables GPIO 6. ′ Page: 4-35 SP-6110/6112/6118 USER S MANUAL...
  • Page 78 Chapter 4 AMI BIOS Setup BIOS Setting Options Description/Purpose -enabled -disabled, GPIO 7 Enables or disables GPIO 7. -enabled ′ Page: 4-36 SP-6110/6112/6118 USER S MANUAL...
  • Page 79 PIO mode. -enabled Enabled chooses DMA transfer mode. If inserted, configures CFast storage CFast via SATA -disabled device. When disabled it selects PIO Port 1 -enabled mode. Option Enabled chooses DMA transfer mode. ′ Page: 4-37 SP-6110/6112/6118 USER S MANUAL...
  • Page 80 Displays the current Compatibility no changeable options Version Support Module version, e.g. “7.65”. When set to Force BIOS it allows the Option ROM -Force BIOS POST screen to display Option ROM Messages -Keep Current messages. ′ Page: 4-38 SP-6110/6112/6118 USER S MANUAL...
  • Page 81 Chapter 4 AMI BIOS Setup BIOS Setting Options Description/Purpose -[USB/DVD/ hard drive(s)] Allows setting up boot option(s) from Boot Option #1 -built-in EFI shell menu listed. -disabled ′ Page: 4-39 SP-6110/6112/6118 USER S MANUAL...
  • Page 82 Chapter 4 AMI BIOS Setup 4-6-1. Boot – Hard Drive BBS Priorities Hard Drive BBS Priorities Screen BIOS Setting Options Description/Purpose -[drive(s)] Allows setting the boot order of Boot Option #1 -disabled available drive(s). ′ Page: 4-40 SP-6110/6112/6118 USER S MANUAL...
  • Page 83 Security Screen BIOS Setting Options Description/Purpose Administrator password can be up to 20 Specifies the administrator password. Password alphanumeric characters password can be up to 20 User Password Specifies the user password. alphanumeric characters ′ Page: 4-41 SP-6110/6112/6118 USER S MANUAL...
  • Page 84 Save Changes no changeable options settings so far. Discards the changes done in BIOS Discard Changes no changeable options settings so far. Restore Defaults no changeable options Loads the optimized defaults for BIOS ′ Page: 4-42 SP-6110/6112/6118 USER S MANUAL...
  • Page 85 Saves the current values as user no changeable options Defaults defaults. Restore User Loads the user defaults for BIOS no changeable options Defaults settings. Boot Override -[drive(s)] Forces to boot from selected [drive(s)]. ′ Page: 4-43 SP-6110/6112/6118 USER S MANUAL...

  • Page 86: Appendix A System Assembly

    APPENDIX SYSTEM ASSEMBLY This appendix contains the exploded diagram of the system. Section includes: Exploded Diagram for SP-6110 (CPT)/6112/6118 System Exploded Diagram for SP-6110 System Exploded Diagram for SP-6110 CPT System Exploded Diagram for SP-6112 System Exploded Diagram for SP-6118 System...

  • Page 87: Exploded Diagram For Sp-6110 (Cpt)/6112/6118 System

    Appendix A System Assembly EXPLODED DIAGRAM FOR SP-6110 (CPT)/6112/6118 SYSTEM SATA HDD ′ Page: A-2 SP-6110/6112/6118 USER S MANUAL...
  • Page 88 Appendix A System Assembly Rear case ′ Page: A-3 SP-6110/6112/6118 USER S MANUAL...
  • Page 89 Appendix A System Assembly Main board ′ Page: A-4 SP-6110/6112/6118 USER S MANUAL...
  • Page 90 Appendix A System Assembly Heat sink ′ Page: A-5 SP-6110/6112/6118 USER S MANUAL...

  • Page 91: Exploded Diagram For Sp-6110 System

    Appendix A System Assembly EXPLODED DIAGRAM FOR SP-6110 SYSTEM Open & close ′ Page: A-6 SP-6110/6112/6118 USER S MANUAL...
  • Page 92 Appendix A System Assembly LCD cover ′ Page: A-7 SP-6110/6112/6118 USER S MANUAL...
  • Page 93 Appendix A System Assembly Daughter board ′ Page: A-8 SP-6110/6112/6118 USER S MANUAL...
  • Page 94 Appendix A System Assembly LCD holder ′ Page: A-9 SP-6110/6112/6118 USER S MANUAL...
  • Page 95 Appendix A System Assembly LCD Panel ′ Page: A-10 SP-6110/6112/6118 USER S MANUAL...
  • Page 96 Appendix A System Assembly Touch panel & front panel ′ Page: A-11 SP-6110/6112/6118 USER S MANUAL...

  • Page 97: Exploded Diagram For Sp-6110 Cpt System

    Appendix A System Assembly EXPLODED DIAGRAM FOR SP-6110 CPT SYSTEM Open & close ′ Page: A-12 SP-6110/6112/6118 USER S MANUAL...
  • Page 98 Appendix A System Assembly LCD cover ′ Page: A-13 SP-6110/6112/6118 USER S MANUAL...
  • Page 99 Appendix A System Assembly Daughter board ′ Page: A-14 SP-6110/6112/6118 USER S MANUAL...
  • Page 100 Appendix A System Assembly LCD holder ′ Page: A-15 SP-6110/6112/6118 USER S MANUAL...
  • Page 101 Appendix A System Assembly LCD panel ′ Page: A-16 SP-6110/6112/6118 USER S MANUAL...
  • Page 102 Appendix A System Assembly Touch panel & front panel ′ Page: A-17 SP-6110/6112/6118 USER S MANUAL...

  • Page 103: Exploded Diagram For Sp-6112 System

    Appendix A System Assembly EXPLODED DIAGRAM FOR SP-6112 SYSTEM Open & close ′ Page: A-18 SP-6110/6112/6118 USER S MANUAL...
  • Page 104 Appendix A System Assembly LCD cover & daughter board ′ Page: A-19 SP-6110/6112/6118 USER S MANUAL...
  • Page 105 Appendix A System Assembly LCD panel ′ Page: A-20 SP-6110/6112/6118 USER S MANUAL...
  • Page 106 Appendix A System Assembly Touch panel ′ Page: A-21 SP-6110/6112/6118 USER S MANUAL...
  • Page 107 Appendix A System Assembly Front panel ′ Page: A-22 SP-6110/6112/6118 USER S MANUAL...

  • Page 108: Exploded Diagram For Sp-6118 System

    Appendix A System Assembly EXPLODED DIAGRAM FOR SP-6118 SYSTEM Open & close ′ Page: A-23 SP-6110/6112/6118 USER S MANUAL...
  • Page 109 Appendix A System Assembly LCD cover ′ Page: A-24 SP-6110/6112/6118 USER S MANUAL...
  • Page 110 Appendix A System Assembly Daughter board ′ Page: A-25 SP-6110/6112/6118 USER S MANUAL...
  • Page 111 Appendix A System Assembly LCD panel ′ Page: A-26 SP-6110/6112/6118 USER S MANUAL...
  • Page 112 Appendix A System Assembly Touch panel ′ Page: A-27 SP-6110/6112/6118 USER S MANUAL...
  • Page 113 Appendix A System Assembly Front panel ′ Page: A-28 SP-6110/6112/6118 USER S MANUAL...
  • Page 114 APPENDIX TECHNICAL SUMMARY This section introduces you the maps concisely. Section includes: Block Diagram Interrupt Map DMA Channels Map I/O Map Watchdog Timer Configuration Flash BIOS Update Page: B-1...

  • Page 115: Appendix B Technical Summary

    Digital I/O Digital I/O (4/4) USB 2.0 (6) Intel® EG20T Chipset USB2.0 CAN bus CAN bus SATA SATA (1) CFast Socket (1) Clock Generator Power Management IC Controller of PMIC BU7335MWV BE9591AMWV BE9595MWV ′ Page: B-2 SP-6110/6112/6118 USER S MANUAL...

  • Page 116: Interrupt Map

    Intel(R) Platform Controller Hub EG20T DMA Controller #1 - 8810 Intel(R) Platform Controller Hub EG20T UART Controller - 8811 (COM8) Intel(R) Platform Controller Hub EG20T UART Controller - 8812 (COM9) Intel(R) Platform Controller Hub EG20T UART Controller - 8813 (COM10) ′ Page: B-3 SP-6110/6112/6118 USER S MANUAL...
  • Page 117 Intel(R) Platform Controller Hub EG20T SATA AHCI Controller - 880B Intel(R) Platform Controller Hub EG20T DMA Controller #2 - 8815 Ethernet Controller Ethernet Controller System timer System CMOS/real time clock Numeric data processor ′ Page: B-4 SP-6110/6112/6118 USER S MANUAL...

  • Page 118: Dma Channels Map

    Appendix B Technical Summary DMA CHANNELS MAP TIMER CHANNEL ASSIGNMENT Channel 4 Direct memory access controller ′ Page: B-5 SP-6110/6112/6118 USER S MANUAL...

  • Page 119: I/O Map

    Intel(R) Platform Controller Hub EG20T UART Controller - 8814 (COM13) 0x0000D000-0x0000DFFF PCI standard PCI-to-PCI bridge 0x0000D000-0x0000DFFF Ethernet Controller 0x0000C000-0x0000CFFF PCI standard PCI-to-PCI bridge 0x0000C000-0x0000CFFF Ethernet Controller 0x00000A79-0x00000A79 ISAPNP Read Data Port 0x00000279-0x00000279 ISAPNP Read Data Port ′ Page: B-6 SP-6110/6112/6118 USER S MANUAL...
  • Page 120 Motherboard resources 0x00000081-0x00000083 Direct memory access controller 0x00000087-0x00000087 Direct memory access controller 0x00000089-0x0000008B Direct memory access controller 0x0000008F-0x0000008F Direct memory access controller 0x000000C0-0x000000DF Direct memory access controller 0x00000040-0x00000043 System timer 0x00000050-0x00000053 System timer ′ Page: B-7 SP-6110/6112/6118 USER S MANUAL...
  • Page 121 Motherboard resources 0x00000088-0x00000088 Motherboard resources 0x0000008C-0x0000008E Motherboard resources 0x00000090-0x0000009F Motherboard resources 0x000000A2-0x000000BF Motherboard resources 0x000000E0-0x000000EF Motherboard resources 0x000000F0-0x000000FF Numeric data processor 0x00000900-0x0000097F System board 0x000009C0-0x000009FF System board 0x00000400-0x0000043F System board 0x00000480-0x000004BF System board ′ Page: B-8 SP-6110/6112/6118 USER S MANUAL...

  • Page 122: Watchdog Timer Configuration

    Timer can be disabled (default state) or Locked (Hard Reset required to disable WDT). WDT Automatic Reload of Preload value when WDT Reload Sequence is performed. In WDT mode, users need to program the preload value 1 register to all 0’s. ′ Page: B-9 SP-6110/6112/6118 USER S MANUAL...
  • Page 123 "80" to offset Bar1 +0Ch write "86" to offset Bar1 +0Ch write "1" to WDT_RELOAD in Reload Register ------ Step 5 start to count ----------------------------------------------------------------------- set WDTLR - WDT Lock Register (offset 18h) bit 1 to "1" ′ Page: B-10 SP-6110/6112/6118 USER S MANUAL...

  • Page 124: Flash Bios Update

    [Boot] menu as shown on picture bellow select [Hard Drive BBS Priorities], set the USB bootable device to be the boot device press <F4> key to save configuration and exit the BIOS setup menu ′ Page: B-11 SP-6110/6112/6118 USER S MANUAL...
  • Page 125 The recommended options for BIOS ROM update consist of following parameters: program main BIOS image /B: program Boot Block /N: program NVRAM /X: don’t check ROM ID ′ Page: B-12 SP-6110/6112/6118 USER S MANUAL...
  • Page 126 User can restart the system and boot up with new BIOS now Update is complete after restart Verify during following boot that the BIOS version -- displayed at first initialization screen with AMI logo -- has indeed changed to intended version. ′ Page: B-13 SP-6110/6112/6118 USER S MANUAL...
  • Page 127 Appendix B Technical Summary ′ Page: B-14 SP-6110/6112/6118 USER S MANUAL...

This manual is also suitable for:

Sp-6112Sp-6118

Table of Contents