Table of Contents
Advertisement
SAFETY INSTRUCTION
CAUTION
To avoid risk of injury or product
or property damage:
• Use two or more people or
suitable lifting device when
lifting appliance .
• Use only materials and
finishes that will not dis-
color or delaminate and will
withstand temperatures up to
194 °F (90 °C).
• The cooling fan should be
operating when the unit is in
operation. If you notice it is
not, or you observe unusual
or excessive noise, contact
your authorized Beko dealer
before continuing operation.
Failure to do so can result
in damage to the oven or
surrounding cabinets.
• DO NOT use power tools to
remove hardware. Damage to
the hardware or the machine
may occur. DO NOT lose
hardware.
• DO NOT use this product
in rooms unless equipped
with properly adjusted and
functioning Carbon Monoxide
sensors. that are maintained.
Carbon Monoxide sensors
should be installed maximum
6.5 ft. away from the product.
CAUTION
To avoid risk of injury or product
or property damage:
• DO NOT use power tools to
remove hardware. Damage to
the hardware or the machine
may occur. DO NOT lose
hardware.
• DO NOT use this product
in rooms unless equipped
with properly adjusted and
functioning Carbon Monoxide
sensors. that are maintained.
Carbon Monoxide sensors
should be installed maximum
6.5 ft away from the product.
• DO NOT let electrical sup-
ply cord come in contact
with rear surface of oven or
over hot cooking section.
Avoid squeezing, bending or
using clamps on the supply
cord. If the electrical supply
cord is damaged, it must be
replaced.
• The use of cabinets for stor-
age above the oven may
result in a potential burn haz-
ard. Combustible items may
ignite, metallic items may
become hot and cause burns.
• Ensure oven is installed and
secured properly.
7
Advertisement
Table of Contents
