Table of Contents
Advertisement
INSTALLATION
making electrical connections to the
appliance. Ensure connections are
made in accordance with local codes
and ordinances.
• The appliance should be installed
and connected to electrical power
in accordance with national and
local regulations. In the absence of
codes, the National Fuel Gas Code
ANSI Z223.1/NFPA-54 - latest edi-
tion must be followed.
• In Canada, installation must be in
accordance with the current CAN/
CGA B149.1 & 2 Gas Installation
codes and/or local codes. Electrical
installation must be in accordance
with the current CSA C22.1 Cana-
dian Electrical Codes Part 1 and/or
local codes.
• Grounding through the neutral con-
ductor is prohibited for new branch
circuit installations (1996 NEC),
mobile homes, and recreational
vehicles, or in an area where local
codes prohibit grounding through
the neutral conductor.
• The installer must leave these
instructions with the consumer who
should retain for local inspector's
use and for future reference.
• It is important the installation
location has an adequate electri-
cal system. Prior to installation, a
qualified electrician should ensure
the addition of the appliance will
not overload the branch circuit on
which it will be installed.
• Turn off power at main supply
before installing the appliance. The
product should not be connected to
the main supply prior to installation.
Main power must be shut off before
removing the appliance for clean-
ing or servicing.
• Do not remove permanently affixed
labels, warnings, or plates from
oven. This may void the warranty.
6.2
UNPACKING
RISK OF SUFFOCATION
BY THE PACKAGING
MATERIALS! PACKING
ELEMENTS (I.E.,
PLASTIC BAGS,
POLYSTYRENE FOAM,
NAILS, PACKING
STRAPS, ETC.) SHOULD
NOT BE LEFT AROUND
WITHIN EASY REACH OF
CHILDREN, AS THESE
MAY CAUSE SERIOUS
INJURIES OR DEATH.
14
DANGER
Advertisement
Table of Contents
