Beko CSM 63320 DWL Service Manual
  1. Manuals
  2. Brands
  3. Beko Manuals
  4. Oven
  5. CSM 63320 DWL
  6. Service manual

Beko CSM 63320 DWL Service Manual

Barbaros adora timer buılt ın oven
Hide thumbs
Table of Contents

Advertisement

Quick Links

Barbaros Adora Timer Buılt ın Oven
BARBAROS-ADORA TIMER
BUILT IN OVEN
SERVICE MANUAL
1/EN

Advertisement

Table of Contents
loading

Related Manuals for Beko CSM 63320 DWL

Summary of Contents for Beko CSM 63320 DWL

  • Page 1 Barbaros Adora Timer Buılt ın Oven BARBAROS-ADORA TIMER BUILT IN OVEN SERVICE MANUAL 1/EN...

  • Page 2: Table Of Contents

    Barbaros Adora Timer Buılt ın Oven 1.COVER 2.INDEX 1. COVER 2.INDEX 1.COVER ............................2 3.SAFETY WARNING ........................4 3.1 G ..........................4 ENERAL AFETY 3.2. S ......................4 AFETY FOR ONFİGURATİONS 3.3 I ......................5 NFORMATİONS FOR ONSUMER 4. TECHNICAL SPECIFICATIONS ..................... 6 5.
  • Page 3 Barbaros Adora Timer Buılt ın Oven 10. FAILURE DIAGRAMS ......................35 10.1 R ........................35 ESİSTANCE AULTS Resistance does not work;the food is not cooked ................. 35 10.2 L ..........................36 AULT Furnace is working but the oven does not illuminate ..............36 Oven does not work,oven lamp does not light, ................

  • Page 4: Safety Warning

    Barbaros Adora Timer Buılt ın Oven 3.SAFETY WARNING This section contains safety instructions that will help protect from risk of personal injury or property damage. Throughout this user manual the following symbols are used. Important information or useful hints about usage. Warning of hazardous situations with regard to life and property.

  • Page 5: Informations For Consumer

    Barbaros Adora Timer Buılt ın Oven 3.3 Informations for Consumer  Product may be hot during the usage.Do not touch with hot parts ,inside the oven,heating components etc. .When the product is working it is hot so do not put combustable materials near the product.

  • Page 6: Technical Specifications

    Barbaros Adora Timer Buılt ın Oven 4. TECHNICAL SPECIFICATIONS Manusoft to see the specifications of the product concerned. 6/EN...

  • Page 7: Product Assembly/ Assembly Rules/ Settings

    Barbaros Adora Timer Buılt ın Oven 5. PRODUCT ASSEMBLY/ ASSEMBLY RULES/ SETTINGS 5.1 Product Transportation To carry or move the product, do not use door or handle of the product. Door, handle or hinges can be harmed. Product should be carried by two person for safety of the product and ergonomics When the product is being carried or the product is being put to the ground, do not put it...

  • Page 8: Unpacking Product

    Barbaros Adora Timer Buılt ın Oven 5.2 Unpacking Product To consider product changing in the mounting process, please do not harm package, product and the product package when extracting. Extract package with a knife without harming top and bottom carton. Take the top carton.

  • Page 9: Controlling The Setup Place And Energy Sources

    Barbaros Adora Timer Buılt ın Oven Take stripers which are left and right side of the products. Symbols on the package of the products and meaning of them; Do not carry Carry the product Carry with Preserve the product in this way by Do not step on Fragile barrow in...
  • Page 10 Barbaros Adora Timer Buılt ın Oven Product is designed according to kitchens’ bench so it is placeable. Appropriate safety interval should be between kitchen wall and the furniture. For appropriate interval, please look at the picture.(values are mm type). Used sides, synthetic laminates and glues should be durable to the head (min.100°C). Product should be stayed with the same height with kitchen furnitures.
  • Page 11 Barbaros Adora Timer Buılt ın Oven Right and left in the oven (as shown in the figure) screw holes for mounting the furnace furnishings. Oven, secure by means of screws as shown. The following values for the control of electrical installation products with the product should be considered.

  • Page 12: Electrical Connection

    Barbaros Adora Timer Buılt ın Oven 5.3.3 Electrical connection Connect the product to a grounded outlet/line protected by a fuse of suitable capacity as stated in the "Technical specifications" table. Have the grounding installation made by a qualified electrician while using the product with or without a transformer. Our company shall not be liable for any damages that will arise due to using the product without a grounding installation in accordance with the local regulations.

  • Page 13: Use Of Product

    Barbaros Adora Timer Buılt ın Oven USE OF PRODUCT Time Settings NOTE: Time must be set before using the oven. In case of no time setting the oven it will work. 6.1.1 First Time Setup Time Symbols used in the display Key lock Time of day Display brightness adjustment...

  • Page 14: Screen Brightness Adjustment

    Barbaros Adora Timer Buılt ın Oven Keys; Settings button Programme touch Plus key Minus key Set the time of day with the 3 or 4 key. The clock will be the official clock is not set to report that burns. When the time setting will be lost.

  • Page 15: Alarm Sound Set

    Barbaros Adora Timer Buılt ın Oven 6.1.3 Alarm Sound Set (+) Or (-) to set the desired intensity using the keys. The selected alarm sound intensity "B-01", or "B-02" or "B-03" will be displayed. The selected display brightness tray "D01" or "D02"...
  • Page 16 Barbaros Adora Timer Buılt ın Oven The key lock with 4 keys to deactivate. The display "OFF" will appear. After setting the key lock "On" appears and the key lock remains illuminated. Hours keys can not be used outside of the settings after setting the key lock key.

  • Page 17: Setting The Alarm Clock

    Barbaros Adora Timer Buılt ın Oven 6.1.5 Setting the alarm clock Product time, except for the cooking program can be used for any warning or reminder. Alarm clock, there is no effect on the receptors of the oven. Warning for use. For example, the food in the oven can be used if you want to turn the alarm clock at a given moment.

  • Page 18: Changing The Clock Of The Day

    Barbaros Adora Timer Buılt ın Oven The symbol starts flashing and the alarm sounds the alarm time after the alarm time is completed. You can stop the alarm by pressing any key. Press the program key to reset the alarm time activates the alarm time symbol.

  • Page 19: Oven Settings

    Barbaros Adora Timer Buılt ın Oven Oven Settings 6.2.1 First Working Products must be heated for about 30 minutes during the first run. In this way, it may have been burned in the oven during the production no longer be cleaned and layers. Take all baking trays and racks from the oven.
  • Page 20 Barbaros Adora Timer Buılt ın Oven The time of day is not set timer from 12:00 onwards increase-or / will begin to progress. The time of day clock symbol will appear on the screen to notify you that it is set. The symbol will disappear when the timer is set.

  • Page 21: Fully Automatic Cooking

    Barbaros Adora Timer Buılt ın Oven Fully Automatic Cooking Select the operating mode and temperature. Activate the cooking time symbol for the cooking time by pressing the program. And (-) buttons to adjust the cooking time using. Cooking time symbol will remain lit after adjusting the cooking time.

  • Page 22: Semi-Automatic Cooking

    Barbaros Adora Timer Buılt ın Oven Semi-automatic cooking Symbol to activate the cooking time by pressing the button number 2 for the cooking time. (+) And (-) buttons to adjust the cooking time using. Cooking time symbol will remain lit even after the cooking time is set.

  • Page 23: Starting Grid

    Barbaros Adora Timer Buılt ın Oven Starting Grid; To turn on the grill; Move the icon you want the function button on top of the grid. Select the operating mode and temperature. NOTE: The structure of the food cooked for faster pre-heating for about 5 minutes. (valid for food according to the preheating.
  • Page 24 Barbaros Adora Timer Buılt ın Oven Cake Tray Used for roasting and for placing the food to be baked, roasted or cooked in casserole dishes to the desired rack. Wire Grid Cooking Start / Stop button (9) Press Start to cook. The display shows "cooked"...

  • Page 25: Barcode Label

    Barbaros Adora Timer Buılt ın Oven Tags and Descriptions used in the product 7.2.1 Type the label Given information on the product nameplate label on the product gas. Sticker on the location; According to the type of product, or the product can be seen in the front door or the rear wall of the lower lid is opened.

  • Page 26: Energy Label

    Barbaros Adora Timer Buılt ın Oven Barcode label location; Product packaging is pasted on cardboard. 7.3.3 Energy Label; Product energy label shows energy class, the label shows the volume of the product. 26/EN...
  • Page 27 Barbaros Adora Timer Buılt ın Oven Energy Label lacatıon; Energy label is given with another label groups. 27/EN...

  • Page 28: Genarel Working Principle

    Barbaros Adora Timer Buılt ın Oven 8. GENAREL WORKING PRINCIPLE Ovens that are controlled electronically used in electronic control circuit (module) oven function control, time of day, analog and digital format show, the cooking book and choosing to eat, cooking recipes demonstration of the cooking book and automatic cooking to be done, cooking time display, timer (count backwards to set the time , give audible warning when time runs out) and allows control of the internal temperature of the oven.
  • Page 29 Barbaros Adora Timer Buılt ın Oven to run, an error message is written to the microprocessor. When you enter the service menu screen where the error occurred, which is written. Oven against any improper operation is protected by a bi-metal type thermal circuit breaker .
  • Page 30 Barbaros Adora Timer Buılt ın Oven LED panel can be damaged easily. Please follow instructions explained below. Correct Hold the component from LCM corners by antistatic gloves. Do not hold LCD from sides. False Don not touch IC directly. Do not keep LCMs as shown figure. Storage temperature must be between 0°C-35°C.

  • Page 31: Operating Modes

    Barbaros Adora Timer Buılt ın Oven 8.1 Operatıng Modes  The normal operating mode The Normal Operatıng Mode Oven functions work normally. In this mode, the plug is inserted into the oven starts for the first time. When normal operation mode works , the following functions are working. Statıc Statıc + fan Multi (3D)

  • Page 32: List Of Components / Component Working Principle

    Barbaros Adora Timer Buılt ın Oven 9. LIST OF COMPONENTS / COMPONENT WORKING PRINCIPLE 9.1 Technical specifications of the components Components Power Bottom Resistance 1200 W Turbo Resistance 1800 W Top Resistance / static 1100 W Gril resistance 2200 W Gril + top resistance (1100+1100) 2200 W Turbo motor...

  • Page 33: Component Code Of Conduct

    Barbaros Adora Timer Buılt ın Oven 9.2 Component Code of Conduct Grid Resistance Grid resistance is controlled by the control button under the commutator. Oven Heatıng Clemens Oven heating is controlled by the control button under the commutator. It is located between chasis and metal sheet of bottom.
  • Page 34 Barbaros Adora Timer Buılt ın Oven Turbo Heater Turbo heater is used in multifunction and turbo ovens. It is located in inner back wall of chasis. Bi Metal When thermal circuit breaker does not work, bi metal works and cuts the power. It Works dangerous situation, not normal situation.

  • Page 35: Failure Diagrams

    Barbaros Adora Timer Buılt ın Oven 10. FAILURE DIAGRAMS 10.1 Resistance Faults Resistance does not work;the food is not cooked 35/EN...

  • Page 36: Lamp Fault

    Barbaros Adora Timer Buılt ın Oven 10.2 Lamp Fault Furnace is working but the oven does not illuminate 36/EN...

  • Page 37: Oven Does Not Work,Oven Lamp Does Not Light

    Barbaros Adora Timer Buılt ın Oven Oven does not work,oven lamp does not light, 37/EN...

  • Page 38: Termostat Fault

    Barbaros Adora Timer Buılt ın Oven 10.3 Termostat Fault Furnace runs continuosly,the thermostat is not tripped. 38/EN...

  • Page 39: Therminal Fault

    Barbaros Adora Timer Buılt ın Oven 10.4 Therminal Fault There is no power from the terminal does not diffuse into the electric furnace 39/EN...
  • Page 40 Barbaros Adora Timer Buılt ın Oven 40/EN...

  • Page 41: Measurements To Be Done To Find The Fault Components

    Barbaros Adora Timer Buılt ın Oven 11. MEASUREMENTS TO BE DONE TO FIND THE FAULT COMPONENTS Current and power drawn by components on the product measured with the instrument called a multimeter. Power of the components on the product is measured with an instrument that called multimeter.
  • Page 42 Barbaros Adora Timer Buılt ın Oven When the resistance works, multimeter display shows the value of the resistance. If the display of the multimeter does not show any value, this means that you resistance does not work. 42/EN...

  • Page 43: Electrical Circuit Board

    Barbaros Adora Timer Buılt ın Oven ELECTRICAL CIRCUIT BOARD *** Please click on the relevant product manusoft circuit diagram. 43/EN...

  • Page 44: Component Assembly / Disassembly Be Used In Equipment

    13. COMPONENT ASSEMBLY / DISASSEMBLY BE USED IN EQUIPMENT Screwdrivers needlenose Nippers...

  • Page 45: Component Assembly / Di̇sassembly

    14.COMPONENT ASSEMBLY / DİSASSEMBLY NOTE: The following components disassembly operations are related below. For component installations apply this operations in reverse order. 14.1 Removing the panel Before removing the board, the top of the wall must be dismantled. With the help of screwdriver, remove the screws of the top wall connection.
  • Page 46 Panels are connected with two screws to the front profile. Panels were treated with 2 of each notch on the side pillars. Remove the board from lifting upward notch. 46 | EN...

  • Page 47: Removing The Clock (Adora Timer)

    You can change the idle board with a new one. 14.2 Removing the clock (Adora Timer) Removing the clock's panel. Firstly remove the top wall and control panel to change Adora timer. 47 | EN...
  • Page 48 Remove the cable groups on the hour. Remove the clock board that connects the upper then remove the screws from the time the board by screwdriver. Remove the screw at the bottom Likewise hours. 48 | EN...
  • Page 49 Detach the connecting tab with screwdriver in the right and left of the clock. Replace the old with the new clock. 49 | EN...

  • Page 50: Changing The

    14.3 Changing the front cover Open the front cover. Open the clips by pressing downwards as seen in the picture on the right and left front door hinge slot. 50 | EN...
  • Page 51 Turn the front door half open position. Pull the door upwards and remove. Note: Remember to close the clips on the cover attaching the hinge slots in the cover will not close unless otherwise indicated. 51 | EN...

  • Page 52: Replacing The Front Door Hinge

    14.4 Replacing the front door hinge Remove the front cover screws with a screwdriver. After remove the screws on the hinges, pull the empty slot and change with a new hinge. 52 | EN...

  • Page 53: Changing The Removable Glass Cover

    14.5 Changing the removable glass cover Remove the top decor, located on the lid first. Pull yourself to remove the front door inner glass. Get in the middle of the glass remaining in pulling yourself. 53 | EN...
  • Page 54 After removing the screws, pull it as seen in the picture below. 54 | EN...
  • Page 55 Remove the vent cover on the side of the decor Get the vent from the metal sheet. 55 | EN...

  • Page 56: Changing The Handle

    14.6 Changing The Handle To do this, first remove the front cover. Remove the screws of the handle with allen wrench as shown in the figure by 2. 56 | EN...
  • Page 57 Pull out the handle grip pins down the drain. This can change the blade remains in the grip handle. 57 | EN...

  • Page 58: Changing The Upper Wall

    14.7 Changing the upper wall Screw off the screws of the top wall. Then lift the top wall up. 58 | EN...

  • Page 59: Bi-Metal Thermostat Replacement

    14.8 Bi-metal thermostat replacement Bimetal thermostat has 2 screws. Screw off these with a screwdriver. Then remove and replace the thermostat with a new one. 14.9 Changing the engine cooling At the top of the chassis cooling (ventilation) keep the engine clockwise to remove and replace the engine.

  • Page 60: Changing The Ventilation Plate

    14.10 Changing the ventilation plate Remove the top wall. Screw off 2 screws that attached the ventilation to chassis. 60 | EN...

  • Page 61: Air-Conditioning Thermostat Replacement

    Pull the ventilation plate opposite of the red line. 14.11 Air-conditioning thermostat replacement Remove the top of the wall before replacing the thermostat ventilation. Ventilation thermostat is mounted with 2 screws 61 | EN...

  • Page 62: Removing The Rear Wall

    By removing the air conditioning thermostat, replace the screws. 14.12 Removing the rear wall 62 | EN...
  • Page 63 Remove the 8 screws shown in the picture above. Rear wall opens rıgh ward. 63 | EN...
  • Page 64 Lift the rear wall up by the area marked red. 64 | EN...

  • Page 65: Removing The Side Decor

    14.13 Removing the Side decor Remove the side walls. Then screw off 3 screws that marked red in the picture below. Replace tabs by removing profiles. 14.14 Replacement the bottom plate 65 | EN...
  • Page 66 Bottom and sides of the oven has 10 screws. Screw off these. Remove the bottom of the base plate to ground, as shown in the parts of the picture. 66 | EN...

  • Page 67: Changing The Switch

    14.15 Changing the switch Firstly you must detach the top wall to remove the swıtch. So screw off side wall’s screws. Take on the swıtch that detached the side wall. 67 | EN...
  • Page 68 Switch picture 68 | EN...

  • Page 69: Catalytic Removal Of The Inner Side Wall

    14.16 Catalytic removal of the inner side wall Firstly, remove the wire shelves that are in front of the catalytic side walls. Then screw off wire rack screws. 69 | EN...

  • Page 70: Changing The Grid Resistance

    Replace the old catalytic side walls to new ones. 14.17 Changing the grid resistance Firstly remove the back wall and top wall. then; Remove the power cord of the resistance. 70 | EN...
  • Page 71 Screw off 2 screws. Open the front cover. Grid resistance has 2 screws that connects to the wall. Screw off them. 71 | EN...

  • Page 72: Changing The Oven Heating

    Get off the grid’s idled resistance from the plate. Then, insert new resistance’s terminales by following electrical schematic, and close the back wall. 14.18 Changing the oven heating For this operation, remove the rear wall of the oven .Then; Remove electrical cords of the lower resistance. 72 | EN...
  • Page 73 Screw off the 2 screws. Pull it yourself to remove resistance. 73 | EN...

  • Page 74: Replacing Turbo Resistance

    14.19 Replacing Turbo resistance For this operation, remove the top and back wall. Then; Remove the cables of Turbo resistance. The fan cover plate has two screws. Screw off them. Then remove fan cover plate. 74 | EN...
  • Page 75 Turbo resistor has two screws that connect it to chasis, Screw off them and replace turbo resistance with new one. 75 | EN...

  • Page 76: Replacement Of Oven Seal

    14.20 Replacement of oven seal Firstly, open the oven door.. Chassis has notches to mount the seal. Remove the seal from the specified places. Then change with the new. 76 | EN...

  • Page 77: Replacing Turbo Engine

    14.21 Replacing turbo engine For this operation, Remove top wall, rear wall and fan cover plate. Disconnect the cables of the turbo engine. Remove the turbo fan. 77 | EN...

  • Page 78: Changing Terminal

    Turbo engine has 3 screws, screw off them then replace the turbo engine. then connect the electric terminals according to scheme of the new turbo engine. 14.22 Changing terminal For this procedure before you remove the rear wall. then; Open the terminal cover. 78 | EN...
  • Page 79 Terminal that connects to the rear wall and right in the box on the left (marked in the picture) Unscrew the screws with a screwdriver. Remove the cables in the back wall of the terminal block. .Take the terminal box 79 | EN...

  • Page 80: Replacement The Telescobic Rail

    14.23 Replacement the telescobic rail Screw off the screw that connects wire rack with side wall. Then replace the wire rack with the new one. 14.24 Replacing the oven lamp Remove the lamp’s glass. 80 | EN...

  • Page 81: Square Oven Lamp Replacement

    Replace the old lamp with new one. 14.25 Square oven lamp replacement Square lamp locates on the right side of chasis. Detach the lamp by screwdriver. 81 | EN...

  • Page 82: Replacement The Catalyzer

    14.26 Replacement the catalyzer Firstly, remove the top wall. Catalyzer is connected to the top wall with 3 nuts. Screw off them to remove the catalyzer. 82 | EN...

  • Page 83: Replacement The Pyro Door Lock

    Replace the old catalyzer with new one. 14.27 Replacement the pyro door lock Firstly, remove the top wall. Metal sheet of pyro door lock is mounted at the top right side of chasis. Screw off that connects to the chassis with a screwdriver . 83 | EN...
  • Page 84 Push the part ( that is on the side wall) of pyro door door lock opposite of the red line.(like the picture above) You can change it with a new door lock idle. 84 | EN...

  • Page 85: Replacement The Metal Sheet Of Pyro Ventilation

    14.28 Replacement the metal sheet of pyro ventilation Firstly, remove the top wall. Remove the plastic that is on the left side of metal sheet of air ventilation. Screw off the 2 screws of the plastic. Screw off the 2 screws that connect air ventilation with back panel of the oven. 85 | EN...
  • Page 86 Pull the metal sheet of air ventilation opposite of the red line (that is shown the picture above) 86 | EN...

  • Page 87: Replacement The Engine Of Pyro Cooling

    14.29 Replacement the engine of pyro cooling. Firstly, remove the top wall. Screw off the 3 screws that connect cooling engine with the metal sheet of air ventilation. 87 | EN...

  • Page 88: Replacement The Engine Thermostat Of Cooling

    Replace the engine with a new one. Then check the wiring. 14.30 Replacement the engine thermostat of cooling Firstly, remove the top wall. Screw off 2 screws that connect thermostat with the metal sheet of air ventilation. Then replace the thermostat with the new one. 88 | EN...
  • Page 89 Envelope IV 89 | EN...
  • Page 90 7732187904 (BWOS 24202 SS) Basic Definitions Marketing Code BWOS 24202 SS Basic Definitions Pool Name Basic Definitions Oven Supplier Basic Definitions Brand BLOMBERG Basic Definitions Country CANADA; UNITED STATES Basic Definitions Sub-Brand Basic Definitions Platform Name Standard Built-in Ovens (barbaros) Basic Definitions SAP Code 7732187904...
  • Page 91 CONTROL PANEL Oven Display Color Green CONTROL PANEL Display Button Type Round CONTROL PANEL Display Button Color Black CONTROL PANEL Display Lock CONTROL PANEL Display Brightness Adjustment CONTROL PANEL Push-in Pop-out Knob CONTROL PANEL Knob Type CONTROL PANEL Knob Color Black CONTROL PANEL Knob Ring Color...
  • Page 92 Main Cavity Features Cooling Fan Main Cavity Features Steam Assisted Cooking Main Cavity Features Steam Cleaning Main Cavity Features Conventional Cooking Main Cavity Features Fan Assisted Cooking Main Cavity Features Bottom Heating Main Cavity Features Top Heating Element Main Cavity Features Fan Heating Main Cavity Features Grill with Fan...
  • Page 93 Performance Stand-by Power Consumption (W) 0.85 watts [joules/second] Performance Total Gas Power Performance Noise (dB(A) re 1 pW) Energy consumption seperated bottom cavity (forced air convection) Performance (kWh) Energy consumption sperated top Performance cavity (forced air convection) (kWh) Marketing Data Product Form Marketing Data Accessory Link...
  • Page 94 Production Information Industrial Design Approval Required Production Information TFT Display Printed Documents Gas Conversion Booklet Printed Documents Quick Guide Printed Documents Cook Book Printed Documents Energy Label (Oven) Printed Documents Product Fiche (Black & White) Printed Documents Manufacturing Location Information Printed Documents "Made in"...
  • Page 95 Packaging & Dimensions Depth - Unpacked (cm)(z) 56.70 centimeters Packaging & Dimensions Width - Unpacked (cm)(x) 59.40 centimeters Packaging & Dimensions Height - Unpacked (cm)(y) 59.50 centimeters Packaging & Dimensions Weight - Unpacked (kg) 36.400 kilograms Packaging & Dimensions Depth - Packed (in.)(z) 25.984251 Packaging &...
  • Page 96 Product Fiche Volume_MC Product Fiche Volume_TC Product Fiche Number of gas fired burners Product Fiche Type of hob Product Fiche Energy_consump_topcavity_forced -...
  • Page 104 SUPPLY CORD SUPPLY CORD SUPPLY CORD SUPPLY CORD SUPPLY CORD 263.1000.29 263.1000.29 263.1000.29 263.1000.29 263.1000.29 EARTH EARTH EARTH EARTH EARTH 110 V 110 V 110 V 110 V 110 V 110 V 110 V 110 V T b FAN Turbo FAN Turbo FAN Turbo FAN Turbo FAN 240 V 240 V...

This manual is also suitable for:

Csm 63320 dsl

Table of Contents