Installation Conditions; Installation - Beko WOD30100SS Installation Manual

Built-in double oven
Table of Contents

Advertisement

INSTALLATION

to the State of California to cause
cancer, birth defects, or other
reproductive harm, and requires
businesses to warn of potential
exposure to such substances. This
appliance can cause low-level ex-
posure to some of the substances
listed, including benzene, form-
aldehyde, carbon monoxide, and
toluene.
• All electric wall ovens must be
hard wired (direct wired) into an
approved junction box. A plug and
receptacle is not permitted for this
application. Do not shorten the
flexible conduit. The conduit strain
relief clamp must be securely at-
tached to the clamp. If the flexible
conduit will not fit within the clamp,
do not install the oven until a clamp
of the proper size is obtained.
Junction box may be located in
adjacent cabinet.
6.4
INSTALLATION
CONDITIONS
• All dimensions given in this manual
are in inches and millimeters.
• Oven dimensions and cutout di-
mensions are given in the previous
sections.
• Use cutout dimensions appropriate
for type of cabinet used in installa-
tion.
• Ensure cutout dimensions are ac-
curate for the type of cabinet and
appliance.
• All cabinet construction should be
complete and any dust or debris re-
moved before installing appliance.
• The cabinet shelf the appliance
will be installed on should be able
to withstand the weight of 220 lbs
(100 kg) or more.
• A shelf must be installed between
the oven and any drawer directly
under the oven.
• Use safety gloves before carry the
oven.
6.5
INSTALLATION
1. Open oven door and unlock
hinge clamps.
1
1
16

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wod30100cf

Table of Contents