Table of Contents
Advertisement
PREPARE FOR USE
7.4
INITIAL HEATING
Smoke and smell may be emitted during the initial heating cycle and for
several hours after. This is a normal condition from burning production
residues. Ensure room is well-ventilated to remove smoke and smell. Avoid
directly inhaling the smoke and smell that is emitted. Follow the steps below
for both upper and lower ovens.
1. Remove all baking trays and wire grills from the oven.
2. Close oven door.
3. Touch the "Bake" touchpad.
4. Set temperature to 350 °F (175 °C).
5. Touch the "Start" touchpad and allow the oven to operate for 30 minutes.
6. Touch the "Cancel" touchpad for both upper and lower ovens.
7. Touch the "Broil" touchpad.
8. Set broil temperature to "High".
9. Touch the "Start" touchpad and allow the oven to operate for 30 minutes.
10. Touch the "Cancel" touchpad for both upper and lower ovens.
7.5
PERFORMANCE CHECKLIST
A qualified installer should carry out the following checks:
• Check oven bake function - bake element at full power.
• Check oven convection bake function - ring heater at full power with con-
vection fan on.
• Check oven roast function - bake and broil elements on.
• Check oven convection roast function - bake and broil elements on with
convection fan on.
• Check oven broil function - broil element at full power.
• Check oven convection broil function - broil element on with convection fan
on.
• Check oven self-clean function - oven door will lock automatically. Check
broil element on through oven door glass. Abort self-clean cycle to unlock
oven door.
7.6
SERVICE INFORMATION
Please contact you authorized Beko dealer or visit
www.bekoappliances.com to locate and get information for the closest
authorized Beko service center.
24
Advertisement
Table of Contents
