Table of Contents
Advertisement
INSTALLATION
4a. Connect green GROUND wire
and white wire from oven to
branch circuit NEUTRAL wire
in junction box. Connect red
and black wires from oven to
corresponding branch circuit red
and black wires in junction box.
(Where local code allows for the
connection of the GROUND wire
from the appliance to the branch
circuit NEUTRAL wire.)
4b. Disconnect green GROUND wire
from white NEUTRAL wire at free
end of appliance conduit and
connect green GROUND wire
from appliance to GROUND wire
(bare or green wire) in junction
box. Connect white NEUTRAL
wire from appliance to NEUTRAL
wire in junction box. Connect
red and black wires from oven to
corresponding branch circuit red
and black wires in junction box.
(Where local code prohibits the
connection of the GROUND wire
from the appliance to the branch
circuit NEUTRAL wire.)
To avoid risk of injury
or product or property
damage, ensure electrical
supply cord is free and not
clamped, bent, or squeezed.
Do not route electrical
supply cord so that it will be
in contact with rear surface
of oven or over hot cooking
section. If the electrical
supply cord is damaged, it
must be replaced.
5. Push seal area of oven to
position oven in cabinet cutout.
Position oven so oven frame and
cabinet frame are flush.
18
CAUTION
Advertisement
Table of Contents
