Crosswater 28-07 Installation Instructions

Fenmore handshower with wall outlet/port with ribbing

Download this manual

Fenmore

Handshower with Wall Outlet/Port with Ribbing

28-07

Installation Instructions

Adjustable Wrench

For ease of installation you will need:

● To read the installation instructions completely before beginning.

● To read all warnings, care, and maintenance information.

● To complete the valve rough-in prior to installing this trim kit.

Tools You Will Need

Adjustable Pliers

Before beginning installation, check for any damage

that may have occurred during transport.

Note: Damage claims cannot be made during or

after installation.

Screwdriver

15125635

Need help?

Do you have a question about the 28-07 and is the answer not in the manual?

Page 1 Fenmore Handshower with Wall Outlet/Port with Ribbing 28-07 Installation Instructions Tools You Will Need Screwdriver Adjustable Wrench Adjustable Pliers For ease of installation you will need: Before beginning installation, check for any damage ● To read the installation instructions completely before beginning.
Page 2 28-07 Installation Instructions Thread Teflon Tape Wrap the joint with thread teflon tape Install the ribbing cover and shower Connect the shower hose to the and connect with the wall mounted fixing seat on the joint and secure it. shower and water outlet.
Page 3 Cleaning Instructions Rinse away any traces of soap and gently dry with a clean, soft cloth after each use. Rinse completely with water and dry any overspray. This will maintain the finish and avoid water spotting. To remove mineral deposits, use a 50/50 solution of white vinegar and water. Do not allow the solution to soak on the product.
Page 4 3 1/16 ＂ 4 1/16 ＂ Warranty - This Crosswater London product is covered by a limited lifetime warranty. For full details, terms and conditions please visit our website. www.crosswaterlondon.com For further information contact: Crosswater London, 393 Fortune Blvd., Milford, MA 01757...

28-07-pc