modway EEI-3048 Manual

Arm chair

Table of Contents

Download this manual

EEI–3048

ARM CHAIR

Thank you for purchasing the MODWAY CHAIR！

Before you start, here are some helpful advice:

1.We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step

instructions.

2.Owing to the size and weight of the chair, we recommend that it is assembled by two adults, on a carpeted or

padded area, in the room that it is intended for. Approximate assembly time: 30 minutes.

3.Please do not use any tools other than those provided or recommended in these instructions.

4.Please do not throw away any of the packaging or the instruction until you have checked all the components and

hardware and the furniture is fully assembled. Please ensure that the packaging is disposed of in a safe and

environmentally friendly way.

5.Assemble all components loosely until advised to tighten. Depending on use, it may be necessary to tighten the

components from time to time, so please save the tools that have been provided.

6.Please keep all fitting out of reach of children.

Chair Body

Customer Service 908-368-1025︱www.modwayfurniture.com

Front Leg

Short Bolt M8x65mm

Long Bolt M8x75mm

Flat Washer M8

Allen Wrench M5

Back Leg

Page 1 of 4

Table of Contents

Need help?

Do you have a question about the EEI-3048 and is the answer not in the manual?

Page 1 EEI–3048 ARM CHAIR Thank you for purchasing the MODWAY CHAIR！ Before you start, here are some helpful advice: 1.We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step instructions. 2.Owing to the size and weight of the chair, we recommend that it is assembled by two adults, on a carpeted or padded area, in the room that it is intended for.
Page 2 EEI–3048 ARM CHAIR STEP 1: Put Chair Body (1) upside down on a carpeted or padded surface. Open Velcro on bottom of Chair Body (1) and find the package of Front Legs (2), Back Legs (3) and Hardware as shown. Package of Front Legs, Back Legs and Hardware Velcro STEP 2:...
Page 3 EEI–3048 ARM CHAIR STEP 3: Place 2 pieces of Front Legs (2) to the front position of Chair Body (1) as shown. Insert 2 pieces of Short Bolt (A) with 2 pieces of Flat Washer (C) into the bottom pre-drilled holes on Front Legs (2) through the bottom pre-drilled on the back of Chair Body (1).
Page 4 EEI–3048 ARM CHAIR STEP 5: Carefully cover the bottom of Chair Body (1) by Velcro as shown. STEP 6: Carefully turn over the assembled Chair. Assembly is complete. Your chair is ready to be used now! Customer Service 908-368-1025︱www.modwayfurniture.com Page 4 of 4...