Related Manuals for Jetson Copperhead JCOPHD-BLK
Summary of Contents for Jetson Copperhead JCOPHD-BLK
- Page 1 Copperhead Extreme-Terrain Electric Scooter. A guide for your ride. IMPORTANT: READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE. MODEL: JCOPHD-BLK Designed in Brooklyn...
- Page 3 Jetson's top two riding rules: Be safe. Have fun!
-
Page 4: Table Of Contents
Contents Safety Warnings ................................ 4 Warranty Coverage ..............................5 Product Overview ..............................6 Specs & Features ..............................8 Online Resources ..............................9 1. Getting Started Starting Notes ..............................10 Unfolding & Folding the Copperhead ........................ 11 Assembling the Handlebar ..........................17 2. - Page 5 4. Making Moves Starting & Riding ..............................33 Using Speed Modes ............................35 Using the Brakes ..............................36 Activating Cruise Control ........................... 37 Maximizing Speed & Riding Range ........................38 5. Safe Journeying Pre-Ride Safety Checks ............................39 Helmet Safety ..............................
-
Page 6: Safety Warnings
Safety Warnings • Before use, please read the user manual and safety warnings carefully, and make sure you understand and accept all the safety instructions. The user will be responsible for any loss or damage caused by improper use. • Before each cycle of operation, the operator shall perform the preoperation checks specified by the manufacturer: That all guards and pads originally supplied by the manufacturer are in proper place and in serviceable condition;... -
Page 7: Warranty Coverage
• Prolonged exposure to UV rays, rain and the elements may damage the enclosure materials, store indoors when not in use. MODIFICATIONS Do not attempt to disassemble, modify, repair, or replace the unit or any components of the unit without instruction from the Jetson Care Team. This will void any warranty, and can lead to malfunctions which may cause injury. -
Page 8: Product Overview
Product Overview HANDLEBAR* STEM 10. KICKSTAND a. THROTTLE STEM LOCKING LATCH 11. FOLDING HOOK b. HANDLEBAR CLAMP 4. FOLDING HINGE POINT 12. TAILLIGHT/BRAKE LIGHT c. LEFT/FRONT HANDBRAKE HEADLIGHT 13. DISC BRAKE d. RIGHT/REAR HANDBRAKE 6. WHEEL (X2; FRONT AND REAR) e. - Page 9 NOTE: IMAGES MAY NOT REFLECT EXACT APPEARANCE OF ACTUAL PRODUCT.
-
Page 10: Specs & Features
Specs & Features • PRODUCT DIMENSIONS: 43.7″ (L) × 25.2″ (W) × 50.4″ (H) • PRODUCT DIMENSIONS, FOLDED: 43.7″ (L) × 25.2″ (W) × 23.0″ (H) • DECK SIZE: 14.5″ (L) X 7.5″ (W) • WEIGHT LIMIT: 265 LBS • PRODUCT WEIGHT: 42 LBS •... -
Page 11: Online Resources
Online Resources Scan for our most updated Copperhead onboarding materials and support resources. -
Page 12: Getting Started Starting Notes
1. Getting Started Starting Notes · REMOVE ALL PACKAGING BEFORE BEGINNING ASSEMBLY. · THE DIRECTIONS GIVEN IN THIS MANUAL—RIGHT, LEFT, FRONT/FORWARD, AND REAR/BACK—ARE ORIENTED AS THE RIDER WOULD SEE THEM WHEN STANDING ON THE SCOOTER. THE "RIGHT SIDE" OF THE SCOOTER, FOR EXAMPLE, IS THE SIDE WHERE THE RIDER'S RIGHT HAND WILL BE. -
Page 13: Unfolding & Folding The Copperhead
Unfolding & Folding the Copperhead WHEN TO UNFOLD: FOR ASSEMBLY AND RIDING WHEN TO FOLD: FOR STORAGE AND TRANSPORT UNFOLDED FOLDED... - Page 14 HOW TO UNFOLD: 1. PROP THE SCOOTER UPRIGHT ON THE KICKSTAND (SEE PAGE 32). 2. TOGGLE THE TOP OF THE FOLDING CATCH DOWN TO RELEASE IT FROM FOLDING CATCH THE FOLDING HOOK.* (*NOT NECESSARY OUT OF THE BOX FOLDING HOOK WHEN HANDLEBAR IS NOT YET FULLY ATTACHED.)
- Page 15 HANDLEBAR 3. GENTLY LIFT THE HANDLEBAR AND STEM TOWARD THE FRONT OF THE SCOOTER UNTIL THE STEM IS UPRIGHT ON THE STEM BASE. STEM STEM BASE...
- Page 16 4. HOLD THE STEM STEADY AT THE HINGE POINT AND FORCEFULLY PUSH THE STEM LOCKING LATCH CLOSED AGAINST THE STEM. LOCKING LATCH 5. CHECK THAT THE STEM IS SECURE IN THE UPRIGHT POSITION. HINGE POINT...
- Page 17 HOW TO FOLD: 1. PUSH AND HOLD THE TAB ON THE FOLDING LATCH UP, THEN LOCKING LATCH FORCEFULLY PULL THE STEM LOCKING LATCH OPEN.
- Page 18 2. GENTLY LOWER THE HANDLEBAR TOWARDS THE REAR WHEEL UNTIL THE FOLDING CATCH CLICKS ONTO THE FOLDING HOOK. 3. CHECK THAT THE SCOOTER IS SECURE IN THE FOLDED POSITION. FOLDING CATCH IMPORTANT: TO ENSURE THAT THE FOLDING HOOK STEM IS PROPERLY SECURED IN THE FOLDED POSITION, MAKE SURE THAT THE CATCH "CLICKS"...
-
Page 19: Assembling The Handlebar
Assembling the Handlebar 1. LOOSEN AND REMOVE THE KNOB BY TURNING IT OFF CLOCKWISE. SLIDE THE FLAT WASHER OFF THE END OF THE LATCH STEM. 2. KEEPING THE CURVED WASHER ON THE LATCH STEM, PULL THE LATCH UP UNTIL THE STEM CLEARS FROM THE CLAMP TOP. - Page 20 4. POSITION THE HANDLEBAR IN THE CLAMP SUCH THAT THE FOLLOWING CONDITIONS ARE MET: • THE HANDLEBAR IS CENTERED IN THE CLAMP AND CURVED UPWARD IN A "U" SHAPE • THE CURVE OF THE HANDLEBAR NESTLES IN THE CURVE OF THE CLAMP BOTTOM •...
- Page 21 5. CLOSE THE CLAMP BY BRINGING THE TOP DOWN OVER THE HANDLEBAR. ENSURE THAT THE HOLE IN THE CLAMP TOP IS ALIGNED WITH THE HOLE IN THE CLAMP BOTTOM. CLAMP TOP CLAMP BOTTOM...
- Page 22 6. WITH THE CURVED WASHER STILL ON THE STEM OF THE CLAMP LATCH, SLIDE THE STEM DOWN INTO THE SET OF ALIGNED HOLES FROM ABOVE THE CLAMP. 7. SLIDE THE FLAT WASHER ONTO AND UP THE EXPOSED END OF THE STEM. 8.
- Page 23 9. LIFT AND HOLD THE CLAMP LATCH OPEN. 10. ROTATE THE HANDLEBAR IN THE CLAMP UNTIL IT IS POSITIONED SUCH THAT: • THE ENDS OF THE HANDLEBAR ARE HIGHER THAN THE CENTER • ALL THE HANDLEBAR FUNCTIONS, ESPECIALLY THE BRAKES, ARE POSITIONED FOR EASY REACH AND IN THE SIGHTLINE OF THE RIDER.
- Page 24 12. ROTATE THE LATCH, IF NECESSARY, AND CLOSE IT TOWARDS THE FRONT OF THE SCOOTER SO THAT IT RESTS ON TOP OF THE CLAMP. NOTE: IF YOU CANNOT OPEN OR CLOSE THE LATCH, THE KNOB MAY BE TOO TIGHT. LOOSEN IT BY ½ CLOCKWISE ROTATION AT A TIME UNTIL YOU ARE ABLE TO UTILIZE THE LATCH.
-
Page 25: Preparing To Ride
2. Preparing to Ride Charging the Battery IT TAKES ABOUT 7 HOURS TO BRING A DEPLETED BATTERY TO FULL CHARGE. CHARGING PORT WITH COVER 1. CONNECT THE CHARGING CABLE WITH THE CHARGER. 2. PULL OPEN THE CHARGING PORT COVER ON THE SCOOTER. 3. - Page 26 IMPORTANT CHARGING NOTES: · ONLY USE THE INCLUDED CHARGER. · ALWAYS KEEP THE CHARGING PORT CLOSED WHEN NOT ACTIVELY CHARGING THE BATTERY. · NEVER TURN ON THE COPPERHEAD WHILE IT IS CHARGING. · FOR BEST BATTERY HEALTH, CHARGE THE BATTERY FULLY DURING EACH CHARGING SESSION—ABOUT 7 HOURS. ·...
-
Page 27: Inflating The Tires
Inflating the Tires BEFORE YOUR FIRST RIDE, YOU WILL NEED TO ADD AIR TO YOUR TIRES TO BRING THEM TO THE RECOMMENDED PRESSURE OF 50 PSI (POUNDS PER SQUARE INCH). USE A GAUGE (NOT INCLUDED) TO CHECK THAT YOUR TIRE PRESSURE IS AT 50 PSI PRIOR TO EVERY RIDE. -
Page 28: Features & Functions Powering On & Off
3. Features & Functions Powering On & Off TO POWER ON OR OFF: PRESS AND HOLD THE POWER BUTTON FOR 3 SECONDS. NOTE: TO PRESERVE BATTERY POWER, YOUR SCOOTER HAS AN AUTO OFF FEATURE AND WILL AUTOMATICALLY POWER OFF AFTER 5 MINUTES WITHOUT USE. ALWAYS REMEMBER TO POWER YOUR SCOOTER OFF WHEN MAKING A PIT STOP OR PUTTING IT AWAY FOR THE NIGHT. -
Page 29: Understanding & Using The Lcd Screen
OR AN ERROR CODE (E00 - E40) DISPLAYS ON YOUR SCREEN, CONTACT THE JETSON CARE TEAM IMMEDIATELY AND BEFORE RIDING YOUR SCOOTER AGAIN. STATUS - YOUR STATUS WILL LIST AS "READY" UNTIL YOU START TO MAKE MOVEMENT, AFTER WHICH IT WILL... - Page 30 CHANGING THE ODOMETER DISPLAY YOUR SCOOTER TRACKS DISTANCE TRAVELED IN TWO WAYS: ODOMETER ("ODO") - TOTAL DISTANCE TRAVELED ON THIS SCOOTER. TRIP ODOMETER ("TRP") - TOTAL DISTANCE TRAVELED DURING A SINGLE USE OF THE SCOOTER. NOTE: THE TRIP ODOMETER WILL RESET EVERY TIME THE SCOOTER IS POWERED OFF. TO TOGGLE THE DISPLAY BETWEEN "ODO"...
- Page 31 CHECKING BATTERY CHARGE LEVEL YOU CAN KEEP TABS ON YOUR BATTERY’S CHARGE LEVEL BY LOOKING TO THE BATTERY INDICATOR ICON ON THE LCD SCREEN. NUMBER OF BATTERY CHARGE LEVEL BARS DISPLAYED 80 % – 100 % 60 % – 80 % 40 % –...
-
Page 32: Using The Lights
Using the Lights IF RIDING IN LOW LIGHT CONDITIONS, TURN ON THE LIGHTS SO YOU CAN BETTER SEE THE ROAD AHEAD AND RIDERS CAN BETTER SEE YOU. A SINGLE BUTTON TURNS ON BOTH THE HEADLIGHT AND TAILLIGHT. TO TURN ON OR OFF THE LIGHTS: QUICK-PRESS THE POWER BUTTON. AN ICON WILL DISPLAY ON THE LCD SCREEN WHENEVER THE LIGHTS ARE ILLUMINATED. -
Page 33: Using The Bell
Using the Bell USE THE BELL AS AN ALERT TO OTHER RIDERS AND PEDESTRIANS. TO SOUND THE BELL: PULL THE BELL TAB TOWARDS YOU AND QUICKLY RELEASE IT TO SOUND THE BELL. BELL TAB BELL... -
Page 34: Using The Kickstand
KICKSTAND Using the Kickstand TO USE THE KICKSTAND, PIVOT IT DOWN AND GENTLY TILT YOUR SCOOTER ONTO IT TO STAND. TO RAISE THE KICKSTAND, PIVOT IT BACK UP. IMPORTANT: ALWAYS RAISE THE KICKSTAND BEFORE RIDING. -
Page 35: Making Moves Starting & Riding
4. Making Moves Starting & Riding THE COPPERHEAD REQUIRES SOME KICK-MOTION ACTIVATION TO START THE MOTOR. 1. PLACE ONE FOOT AT THE FRONT OF THE DECK FACING FORWARD. 2. USE THE OTHER FOOT TO PROPEL THE SCOOTER FORWARD BY PUSHING OFF THE GROUND WITH 1 LARGE KICK. 3. - Page 36 TO ACCELERATE: SLOWLY PUSH DOWN ON THE THROTTLE. IMPORTANT: TO AVOID SUDDEN BURSTS OF SPEED, ALWAYS PUSH DOWN ON THE THROTTLE GRADUALLY. TO MAKE TURNS: ROTATE THE HANDLEBAR TO THE LEFT OR RIGHT. THROTTLE...
-
Page 37: Using Speed Modes
Using Speed Modes YOUR SCOOTER HAS THREE SPEED MODES, EACH OF WHICH HAS A MAXIMUM SPEED AT WHICH THE SCOOTER WILL TRAVEL. TO CHANGE SPEED MODES: QUICK-PRESS THE +/"UP" BUTTON TO GO TO A HIGHER SPEED MODE AND THE -/"DOWN" BUTTON TO GO TO A LOWER SPEED MODE. -
Page 38: Using The Brakes
Using the Brakes GENTLY SQUEEZE THE HANDBRAKES TO SLOW DOWN; SQUEEZE MORE FORCEFULLY TO COME TO A COMPLETE STOP. TO AVOID ABRUPT MOVEMENTS, TRY TO SQUEEZE THE HANDBRAKES GRADUALLY. BRAKE LIGHT: THE TAILLIGHT WILL FLASH TO INDICATE BRAKING EVERY TIME THE HANDBRAKE IS ENGAGED, EVEN IF THE LIGHTS ARE NOT POWERED ON. -
Page 39: Activating Cruise Control
Activating Cruise Control CRUISE CONTROL LOCKS THE SCOOTER IN AT A CERTAIN PACE. ONCE YOU SET CRUISE CONTROL, THE MOTOR WILL DO THE WORK TO KEEP THE PACE, SO YOU CAN RELEASE THE THROTTLE AND JUST STEER. TO ACTIVATE CRUISE CONTROL: HOLD THE THROTTLE ENGAGED AND THE RIDING PACE STEADY FOR 5 SECONDS UNTIL THE CRUISE CONTROL ICON APPEARS ON THE SCREEN TO INDICATE THAT CRUISE CONTROL HAS ENGAGED. -
Page 40: Maximizing Speed & Riding Range
Maximizing Speed & Riding Range THE HARDER THE MOTOR NEEDS TO WORK, THE FASTER YOUR BATTERY WILL DRAIN. IN IDEAL CONDITIONS, THE MAXIMUM MILEAGE THAT CAN BE ACHIEVED PER BATTERY CHARGE IS 12 MILES AND THE MAXIMUM SPEED 20 MPH. THE FOLLOWING FACTORS WILL ALSO AFFECT SPEED AND RIDING RANGE. -
Page 41: Safe Journeying Pre-Ride Safety Checks
5. Safe Journeying Pre-Ride Safety Checks CONDUCT THESE IMPORTANT SAFETY CHECKS BEFORE EVERY JOURNEY: BRAKES MAKE SURE THE BRAKES WORK PROPERLY SUCH THAT: · THE HANDBRAKE LEVERS ARE SECURED TO THE HANDLEBAR AND LUBRICATED SO THEY COMPRESS EASILY. · THE BRAKE PADS ARE NOT WORN AND ARE CENTERED AND ALIGNED WITH THE DISCS. FRAME ·... -
Page 42: Helmet Safety
Helmet Safety A HELMET SHOULD BE WORN BY THE RIDER AT ALL TIMES. PROPER POSITIONING: IMPROPER POSITIONING: THE FOREHEAD IS COVERED THE FOREHEAD IS EXPOSED. BY THE HELMET. A FALL COULD RESULT IN SERIOUS INJURY. * WEAR A HELMET, APPROPRIATE CLOTHING, SHOES, AND SAFETY GEAR. AVOID CLOTHING THAT CAN GET CAUGHT INTO OR UNDER THE WHEELS. -
Page 43: Care & Maintenance
Care & Maintenance TAKE GOOD CARE OF YOUR E-SCOOTER TO KEEP IT RIDING SMOOTHLY AND SAFELY. HERE’S HOW: HANDLING YOUR COPPERHEAD · AVOID EXPOSING YOUR COPPERHEAD TO SEVERE VIBRATION OR INTENSE PHYSICAL IMPACT. · NEVER DISASSEMBLE THE BATTERY. · KEEP YOUR COPPERHEAD AWAY FROM WATER AND MOISTURE. ·... - Page 46 Stay connected. Be sure to follow @ridejetson on social media to learn about fantastic offers, giveaways, and all the latest Jetson news. Loving your ride? Then be sure to leave a review at ridejetson.com/reviews. We can’t wait to hear from you!
- Page 48 Date Code: 04/2023 Document Edition: v1.0 © 2023, JETSON. ALL RIGHTS RESERVED. Manufactured by JETSON ELECTRIC BIKES LLC. No portion of this document, including shape, copy, graphics, and design, may be reproduced or transmitted in any form or by any means.