Related Manuals for Jetson Omega
Summary of Contents for Jetson Omega
- Page 1 Omega Illuminated Electric Scooter A guide for your ride. IMPORTANT: READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE. MODELS: JOMEGA-BLK | JOMEGA2-BLK...
- Page 3 Jetson's top two riding rules: Be safe. Have fun!
-
Page 4: Table Of Contents
......................12 Unfolding & Folding the Omega .. - Page 5 3. Making Moves Riding the Omega ......................28 ......................29 Using Speed Modes ......................30...
-
Page 7: Safety Warnings
• Applying brakes too hard or too suddenly can lock up a wheel, which could cause you to lose control and fall. Sudden or excessive application of the brake may result in injury or death. • If the brake loosens, please adjust with an hexagon wrench, or please contact the Jetson Care Team. • Replace worn or broken parts immediately. - Page 8 - Risque d'incendie - Aucune des pieces ne peut être réparée par l'utilisateur. MODIFICATIONS Do not attempt to disassemble, modify, repair, or replace the unit or any components of the unit without instruction from the Jetson Care Team. This will void any warranty, and can lead to malfunctions which may cause injury.
-
Page 9: Warranty Coverage
Your new Jetson product is warranted against defects in materials and workmanship as indicated on ridejetson.com/warranty for a period of time from the date of original retail purchase when used in accordance with Jetson's user manuals (refer to ridejetson.com/support). Under this warranty, you will be able to direct your claims to Jetson even in situations where you purchased the Jetson Product from one of our authorized retailers. -
Page 10: Product Overview
Product Overview 1. HANDLEBAR 10. FRONT WHEEL 2. POWER & MODE BUTTON 11. FOLDING LEVER 3. LIGHTING BUTTON 12. DECK 4. LCD SCREEN 13. LED LIGHTS 5. ACCELERATION THROTTLE 14. REAR FOOT BRAKE 6. E-BRAKE 15. REAR WHEEL 7. CHARGING PORT WITH COVER 16. - Page 11 NOTE: IMAGES MAY NOT REFLECT EXACT APPEARANCE OF ACTUAL PRODUCT.
-
Page 12: Specs & Features
Specs & Features · MOTOR TYPE: 150W HUB MOTOR · MAX SPEED: 10 MPH* · MAX RANGE: 5 MILES* · BATTERY: 21.6V, 2.5AH LITHIUM-ION · RECOMMENDED AGE: 8+ · MAX CLIMBING ANGLE: 10° · PRODUCT DIMENSIONS, FOLDED: 29.5” (L) × 15.4” (W) × 10.6” (H) ·... -
Page 13: Online Resources
Online Resources Scan for our most updated Omega onboarding materials and support resources. -
Page 14: Getting Started
1. Getting Started Starting Notes · REMOVE ALL PACKAGING BEFORE BEGINNING ASSEMBLY. · THE DIRECTIONS GIVEN IN THIS MANUAL—RIGHT, LEFT, FRONT/FORWARD, AND REAR/BACK—ARE ORIENTED AS THE RIDER WOULD SEE THEM WHEN STANDING ON THE SCOOTER. THE "RIGHT SIDE" OF THE SCOOTER, FOR EXAMPLE, IS THE SIDE WHERE THE RIDER'S RIGHT HAND WILL BE. -
Page 15: Unfolding & Folding The Omega
Unfolding & Folding the Omega WHEN TO UNFOLD: FOR ASSEMBLY AND RIDING WHEN TO FOLD: FOR STORAGE AND TRANSPORT 1. PRESS DOWN ON THE FOLDING LEVER. FOLDING LEVER... - Page 16 2. GENTLY RAISE OR LOWER THE STEM UNTIL IT CLICKS INTO THE UPRIGHT OR COMPACTED POSITION. IMPORTANT: WHEN UNFOLDING FOR ASSEMBLY, CAREFULLY GUIDE THE SEMI-ATTACHED HANDLEBAR UP WITH THE STEM. 3. CHECK THAT THE STEM IS SECURE. UNFOLDED FOLDED...
-
Page 17: Attaching The Handlebar
5MM ALLEN KEY BOLT CLAMP TOP CLAMP BOTTOM Attaching the Handlebar 1. LOOSEN AND REMOVE THE BOLT SECURING THE CLAMP TOP TO THE CLAMP BOTTOM BY TURNING IT COUNTERCLOCKWISE WITH THE 5MM ALLEN KEY. SET THE BOLT AND CLAMP TOP ASIDE. *AS VIEWED FROM IN FRONT OF THE SCOOTER. - Page 18 WIRES HANDLEBAR WIRE ENTRY POINT (OPPOSITE SIDE; NOT SHOWN) CLAMP BOTTOM 2. CAREFULLY TUCK THE WIRES INTO THE HOLE IN THE STEM (FACING THE RIDER'S SIDE) WHILE YOU LOWER THE LOWER THE HANDLEBAR ONTO THE CLAMP BOTTOM. 3. POSITION THE HANDLEBAR ON THE CLAMP BOTTOM SUCH THAT THE FOLLOWING CONDITIONS ARE MET: ·...
- Page 19 5MM ALLEN KEY BOLT HANDLEBAR CLAMP TOP 4. PLACE THE CLAMP TOP OVER THE CENTER OF THE CLAMP BOTTOM HANDLEBAR SUCH THAT THE HOLE IN THE TOP IS ALIGNED WITH THE HOLES IN THE HANDLEBAR AND CLAMP BOTTOM. 5. INSERT THE BOLT THROUGH THE ALIGNED HOLES BY TWISTING IT IN CLOCKWISE.
-
Page 20: Adjusting The Height Of The Handlebar
STEM CLAMP LATCH KNOB STEM CLAMP Adjusting the Height of the Handlebar THE HANDLEBAR SHOULD BE POSITIONED AT A HEIGHT COMFORTABLE FOR THE RIDER AND ONE IN WHICH ALL HANDLEBAR ELEMENTS, INCLUDING THE LCD SCREEN, CAN EASILY BE SEEN. 1. OPEN THE STEM CLAMP LATCH. 2. - Page 21 STEM PIN HOLE 3. WHILE PRESSING IN THE STEM PIN, LIFT OR LOWER THE HANDLEBAR UNTIL THE PIN CLICKS INTO ANOTHER STEM PIN HOLE. STEM PIN *AS VIEWED FROM THE LEFT SIDE OF THE SCOOTER.
- Page 22 STEM CLAMP LATCH KNOB STEM CLAMP 4. CLOSE THE STEM CLAMP LATCH AND TIGHTEN THE KNOB BY TURNING IT CLOCKWISE. 5. CHECK THAT THE HANDLEBAR IS SECURE. IMPORTANT: THE STEM PIN ALONE WILL NOT KEEP THE STEM SECURE. MAKE SURE THE STEM CLAMP IS TIGHTENED AND CLOSED BEFORE RIDING.
-
Page 23: Charging The Battery
Charging the Battery IT CAN TAKE UP TO 5 HOURS TO BRING THE BATTERY TO FULL CHARGE. 1. PULL OPEN THE CHARGING PORT COVER ON THE SCOOTER. 2. PLUG THE CHARGER INTO THE WALL, AND THEN PLUG THE CHARGER CORD INTO THE CHARGING PORT. 3. - Page 24 IMPORTANT CHARGING NOTES: · ONLY USE THE INCLUDED CHARGER OR ONE OBTAINED DIRECTLY THROUGH JETSON LABELED WITH: PJOMEGA-CH FAILURE TO USE CORRECT CHARGER CAN RESULT IN FIRE AND EXPLOSION. · ALWAYS KEEP THE CHARGING PORT CLOSED WHEN NOT ACTIVELY CHARGING THE BATTERY.
-
Page 25: Powering On & Off
Powering On & Off TO POWER ON OR OFF THE SCOOTER: PRESS AND HOLE THE POWER AND MODE BUTTON FOR 2 SECONDS. NOTE: IN ORDER TO PRESERVE BATTERY POWER, THE OMEGA WILL AUTOMATICALLY POWER OFF AFTER 5 MINUTES WITHOUT MOVEMENT. -
Page 26: Features & Functions
2. Features & Functions Understanding your Handlebar & LCD Screen BATTERY LEVEL SECTION SPEED MODE (SECTION 2.2) (SECTION 3.2) CURRENT SPEED LIGHTS ON (SECTION 3.1) (SECTION 2.3) LCD SCREEN POWER & MODE BUTTON LIGHTING BUTTON (SECTION 1.6 & 3.2) (SECTION 2.3) E-BRAKE ACCELERATION THROTTLE (SECTION 3.3) -
Page 27: Checking Battery Charge Level
Checking Battery Charge Level YOU CAN KEEP TABS ON YOUR BATTERY'S CHARGE LEVEL BY LOOKING TO THE BATTERY INDICATOR BARS ON THE LCD SCREEN. NUMBER OF BATTERY CHARGE LEVEL BARS DISPLAYED 71% - 100% 41% - 70% 21% - 40% (CHARGE YOUR SCOOTER NOW!) 1% - 20 % (REALLY, IT'S TIME TO CHARGE!) -
Page 28: Using The Lights
Using the Lights AN ICON WILL ILLUMINATE ON THE LCD SCREEN WHENEVER THE LIGHTS ARE POWERED ON. TO TURN ON AND OFF THE LIGHTS: PRESS AND HOLD THE LIGHTING BUTTON FOR 2 SECONDS. TO CHANGE THE LIGHTS: ONCE THE LIGHTS ARE POWERED ON, CYCLE THROUGH 5 LIGHT MODE OPTIONS BY QUICK- PRESSING THE LIGHTING BUTTON. -
Page 29: Using The Kickstand
KICKSTAND Using the Kickstand TO USE THE KICKSTAND, PIVOT IT DOWN AND GENTLY TILT YOUR SCOOTER ONTO IT TO STAND. TO RAISE THE KICKSTAND, PIVOT IT BACK UP. IMPORTANT: ALWAYS RAISE THE KICKSTAND BEFORE RIDING. -
Page 30: Making Moves
3. Making Moves Riding the Omega THE OMEGA'S MOTOR REQUIRES KICK MOTION ACTIVATION TO START. 1. PLACE ONE FOOT AT THE FRONT OF THE DECK FACING FORWARD. PROPEL THE SCOOTER FORWARD MANUALLY BY PUSHING 2 TIMES CONSECUTIVELY WITH YOUR OTHER FOOT. -
Page 31: Using Speed Modes
Using Speed Modes YOUR SCOOTER HAS 3 SPEED MODES, EACH OF WHICH HAS A MAXIMUM SPEED AT WHICH THE SCOOTER WILL TRAVEL. THE LETTER E, N, OR S WILL DISPLAY ON THE LCD SCREEN TO INDICATE THE SPEED MODE IN WHICH THE SCOOTER IS CURRENTLY SET. -
Page 32: Using The E-Brake
Using the E-Brake PRESS DOWN GENTLY WITH THE LEFT-HAND THUMB TO SLOW DOWN. APPLY MORE PRESSURE TO COME TO A COMPLETE STOP. E-BRAKE... -
Page 33: Using The Rear Foot Brake
Using the Rear Foot Brake PRESS DOWN GENTLY WITH THE REAR RIDING FOOT TO SLOW DOWN. APPLY MORE PRESSURE TO COME TO A COMPLETE STOP. REAR FOOT BRAKE... -
Page 34: Helmet Safety
Helmet Safety A HELMET SHOULD BE WORN BY THE RIDER AT ALL TIMES. PROPER POSITIONING: IMPROPER POSITIONING: THE FOREHEAD IS COVERED THE FOREHEAD IS EXPOSED. BY THE HELMET. A FALL COULD RESULT IN SERIOUS INJURY. * WEAR A HELMET, APPROPRIATE CLOTHING, SHOES, AND SAFETY GEAR. AVOID CLOTHING THAT CAN GET CAUGHT INTO OR UNDER THE WHEELS. -
Page 35: Maximizing Speed & Riding Range
RIDING STYLE: FREQUENT STARTING AND STOPPING WILL REDUCE THE ACHIEVABLE DISTANCE ON ONE BATTERY CHARGE. · AIR TEMPERATURE: THE IDEAL TEMPERATURE FOR RIDING AND STORING THE OMEGA IS BETWEEN 50 - 90°F (10 - 35°C). · INCLINE: THE MOTOR HAS TO WORK HARDER TRAVELING UPHILL THAN ON FLAT STRETCHES OR DOWNHILL. -
Page 36: Care & Maintenance
AT A TEMPERATURE BETWEEN 50 - 90°F (10 - 35°C). CLEANING YOUR OMEGA DO NOT SPRAY OR APPLY WATER DIRECTLY ONTO YOUR OMEGA. WATER CAN CAUSE DAMAGE TO THE WIRING, BATTERY COMPARTMENT, AND LIGHTS, AS WELL AS DETERIORATION OF THE FRAME—ALL OF WHICH COULD CAUSE A MALFUNCTION THAT PUTS RIDER SAFETY AT RISK. - Page 37 Stay connected. Be sure to follow @ridejetson on social media to learn about fantastic offers, giveaways, and all the latest Jetson news. Loving your ride? Then be sure to leave a review at ridejetson.com/reviews. We can’t wait to hear from you!
- Page 40 Date Code: 07/2023 Document Edition: v2.0 © 2023, JETSON. ALL RIGHTS RESERVED. Manufactured by JETSON ELECTRIC BIKES LLC. No portion of this document, including shape, copy, graphics, and design, may be reproduced or transmitted in any form or by any means.
Need help?
Do you have a question about the Omega and is the answer not in the manual?
Questions and answers