Table of Contents
Advertisement
Parent topic:
Related tasks
Accessing the Web Config Utility
Email Server Settings
You can configure these email server settings in Web Config.
Setting
Authentication Method
Authenticated Account
Authenticated Password
Sender's Email Address
SMTP Server Address
SMTP Server Port Number
POP3 Server Address
POP3 Server Port Number
Parent topic:
Sending Email Notifications
You can set up email notifications that will be sent when an event occurs on the product. You can
register up to five destinations.
Note: You must have configured a mail server before setting up notifications.
1. Enter the IP address of the product in a web browser and log into Web Config as an administrator.
Configuring Product Settings
Options/Description
Select the authentication method that matches your email
server
Enter the authenticated account name from 1 to 255
characters long in ASCII
Enter the authenticated password from 1 to 20 characters long
in ASCII using A-Z, a-z, 0-9, and these characters:
! # $ % ' * + - . / = ? ^ _ { ! } ~ @
Enter the sender's email address from 1 to 255 characters
long in ASCII; do not use a period (.) as the first character or
use these characters: ( ) < > [ ] ;
Enter the SMTP server address from 1 to 255 characters long
using A-Z, a-z, 0-9, and "-" in IPv4 or FQDN format
Enter the SMTP server port number between 1 and 65535
Enter the POP server address from 1 to 255 characters long
using A-Z, a-z, 0-9, and "-" in IPv4 or FQDN format
Enter the POP server port number between 1 and 65535
Configuring an Email Server
297
Advertisement
Table of Contents
