Eizo RadiForce MX317W Instructions For Use Manual page 40

Appendix
cannot be predicted theoretically with accuracy. To assess the electromagnetic environment due
to fixed RF transmitters, an electromagnetic site survey should be considered. If the measured
field strength in the location in which RadiForce MX317W is used exceeds the applicable RF
compliance level above, RadiForce MX317W should be observed to verify normal operation. If
abnormal performance is observed, additional measures may be necessary, such as reorienting or
relocating RadiForce MX317W.
*4
Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3 V/m.
40