Table of Contents
Advertisement
Attention
• For PinP (Sub Window) display, it is necessary to set "PinP Settings" in the Setting Menu. For
details, refer to the Installation Manual (on the CD-ROM).
• When an HDMI signal is displayed in single screen mode, the PinP (sub window) function cannot
be used.
When connecting other monitors using a daisy-chain connection
The signal input to the DisplayPort 1 connector or USB-C connector (upstream:
be output to another monitor.
Connect to PC
Signal cable: PP300-V14
Signal cable: CC150SS81G-5A
Attention
• Visit the EIZO web site for information about monitors and graphics boards that can be used for
the daisy-chain connection:
(www.eizoglobal.com)
• To set up a daisy-chain connection, connect to the DisplayPort 1 connector or USB-C connector
(upstream:
). In addition, it is necessary to set "Daisy Chain" in the Administrator Settings
Menu. For details, refer to the Installation Manual (on the CD-ROM).
• In the factory settings, a cap is placed over USB-C (downstream:
using.
2. Plug the power cord into a power outlet and the power connector on the monitor.
Insert the power cord fully into the monitor.
Installation / Connection | 2
USB-C cable
Signal cable: CP200 (optional, sold separately)
) can
). Remove the cap when
27
Advertisement
Table of Contents
