Outputting Audio Linked To Alarm Detection; Voice Alert Menu; Voice Alert 1, 2, 3 Tab - Sony IPELA SNC-DF50N User Manual

Sensor input
Select this option when you link the alarm output to an
external sensor that is connected to sensor input of the
camera I/O port.
Object detection
Select this option when you link the alarm output to the
object detection function.
Click Detection, and the Object detection menu is
displayed to allow you to set the object detection
function (page 65).
Alarm duration
Select the duration for which the alarm output is short-
circuited between 1 and 60 sec.
Effective period
This item becomes active when Mode is set to Alarm.
Set the period during which the alarm detection is
effective.
Always: The alarm detection is always effective.
Schedule: You can specify the period during which
alarm detection is effective.
Click Schedule and the menu for the effective period
is displayed. ("Setting the Schedule — Schedule
Menu" on page 63)
OK/Cancel
See "Buttons common to every menu" on page 26.
60
Outputting Audio Linked to Alarm Detection — Voice alert Menu
Outputting Audio Linked
to Alarm Detection

— Voice alert Menu

Click in the Administrator menu to display
the Voice alert menu.
Use this menu to set the voice alert function to output
audio from the line output jack of the camera when an
alarm is detected by the sensor input or object detection
function.
You can output the audio from the speaker connected to
the camera in synchronization with an alarm event
triggered by the sensor input or the object detection
function.
The Voice alert menu consists of three tabs: Voice alert
1, Voice alert 2 and Voice alert 3. You can configure an
individual audio file on each tab.
Note
Before using the voice alert function, you need to save
the audio file to the camera using the SNC audio upload
tool stored in the supplied CD-ROM.
For the use of the SNC audio upload tool, see page 74.

Voice alert 1, 2, 3 Tab

File
Displays the name of the audio file saved in the camera.
"Not uploaded" is displayed dimly if no audio file is
saved.
To delete the audio file saved in the camera, click
Delete.
Note
Before deleting the audio file, set Voice alert to Off.