Setting The Alarm Output - Alarm Output Menu; Alarm Out 1, 2 Tab - Sony IPELA SNC-DF50N User Manual

• The frame rate and operability on the main viewer
may be reduced when you logged in to the FTP server
of this unit using the FTP client software installed in
the computer.
OK/Cancel
See "Buttons common to every menu" on page 26.
Setting the Alarm Output
— Alarm output Menu
When you click
the Alarm output menu appears.
You can perform setting in this menu to control the
alarm output of the I/O port on the rear of the camera
linked to the alarm detection, the timer, and the Day/
Night function (SNC-DF85/DF80 only).
The Alarm output menu consists of two tabs: Alarm
out 1 and Alarm out 2.
Tip
For the connection of peripheral devices to the alarm
output of the I/O port, see the supplied Installation
Manual.

Alarm out 1, 2 Tab

Alarm output
To activate the alarm output function, select On.
Mode
Select the mode of the alarm output function.
Alarm: Controls alarm output by synchronizing it with
an external sensor input or the built-in object
detection function.
When Alarm is selected, the items Sensor input,
Object detection, Alarm duration and Effective
period become active.
Timer: Controls alarm output using the timer.
Click Schedule and the menu for the effective period
is displayed. ("Setting the Schedule — Schedule
Menu" on page 63)
Day/Night: Controls the alarm output linked to the day/
night function. (SNC-DF85/DF80 only)
Setting the Alarm Output — Alarm output Menu
in the Administrator menu,
59