Setting The Camera Image And Audio - Camera Menu; Common Tab; Mic Volume; Image Mode - Sony IPELA SNC-DF50N User Manual

Setting the Camera
Image and Audio
— Camera Menu
When you click
the Camera menu appears.
Use this menu to set the functions of the camera.
The Camera menu consists of the following tabs:
SNC-DF85/DF80: Common, Picture, Day/Night,
Video codec and Streaming
SNC-DF50: Common, Picture, Video codec and
Streaming

Common Tab

Image mode

Selects the mode of the image output from the camera.
Field: Select this option when shooting a moving image.
Frame: Select this option when shooting a still image.
With this setting, the vertical resolution increases but
the edge of a moving object may be jagged.
Auto: The Frame or Field mode process is
automatically performed depending on movement in
the image. Frame is performed for an area without
movement, and Field is performed for an area with
movement.
Color
Select Color or Monochrome for the image.
Stabilizer
Select the stabilizer to compensate for oscillation. Select
On to activate the stabilizer when the camera is affected
by oscillation.
32
Setting the Camera Image and Audio — Camera Menu
in the Administrator menu,
Notes
• The stabilizer is effective for the images on a
computer. They are not effective for the video output.
• The view angle of the camera is reduced by
approximately 10 % when Stabilizer is set to On.
• The frame rate lowers half when Stabilizer is set to
On.
• The stabilizer may not be effective depending on the
degree of oscillation.
• If a flat object such as a solid wall or floor occupies the
greater part of a shooting scene or if a large object
occupying the greater part of the scene passes by or
continues moving, the whole image may tremble. In
this case, set Stabilizer to Off.
• When the brightness of the scene changes suddenly or
when you change the brightness setting, the whole
image may tremble momentarily.
Microphone
Select whether you are going to send the audio from the
m microphone input connector. Select On to send the
audio from this network camera.
Note
When you change the Microphone setting, click
Refresh on the Web browser to reflect the change when
opening the main viewer page.

Mic volume

Set the volume level of the audio input from the m
microphone input connector. It is adjustable from –10 to
+10.

Audio codec

Select the bit rate when you send the audio from the m
microphone input connector. G.711 (64kbps), G.726
(40kbps), G.726 (32kbps), G.726 (24kbps) or G.726
(16kbps) can be selected.
Note
If the bit rate is set to other than G.711(64kbps), no
audio is output when you use the Java applet viewer.

Audio upload

Using the SNC audio upload tool stored in the supplied
CD-ROM, you can output the audio that is input to the
computer's audio input terminal from the speaker
connected to the line output jack of the camera.
Select Enable to output the audio from the speaker.