Outputting Audio Linked To Alarm Detection; Voice Alert Menu; Voice Alert 1, 2, 3 Tab - Sony Ipela SNC-CH140 User Manual

Camera tampering detection
Select this option when you link the alarm output to the
vibration/shaking detection of the camera.
VMF
Select this option when you link the alarm output to the
VMF detection function.
Motion detection
Select this option when you link the alarm output to the
motion detection function.
Click Detection, and the Motion detection menu is
displayed to allow you to set the motion detection
function (page 73).
Alarm duration
Select the duration for which the alarm is output,
between 1 and 60 sec.
Effective period
This item becomes active when Mode is set to Alarm.
Set the period during which the alarm detection is
effective.
Always: Alarm detection is always effective.
Schedule: You can specify the period during which
alarm detection is effective.
Click Schedule and the menu for the effective period
is displayed. ("Setting the Schedule — Schedule
Menu" on page 72)
OK/Cancel
See "Buttons common to every menu" on page 26.
Outputting Audio Linked
to Alarm Detection

— Voice alert Menu

Click Voice alert in the Administrator menu to display
the Voice alert menu.
Use this menu to set the voice alert function to output
audio from the line output jack of the camera when an
alarm is detected by the sensor input or motion detection
function.
You can output the audio from the speaker connected to
the camera in synchronization with an alarm event
triggered by the sensor input or the motion detection
function.
The Voice alert menu consists of 3 tabs: Voice alert 1,
Voice alert 2 and Voice alert 3. You can configure an
individual audio file on each tab.
Note
Before using the voice alert function, you need to save
the audio file to the camera using the SNC audio upload
tool stored in the supplied CD-ROM.
For details on use of the SNC audio upload tool, see
page 93.

Voice alert 1, 2, 3 Tab

File
Displays the name of the audio file saved in the camera.
"Not uploaded" is displayed dimly if no audio file is
saved.
To delete the audio file saved in the camera, click
Delete.
Note
Before deleting an audio file, set Voice alert to Off.
Test
When an audio file is saved in the camera, you can check
it by playing it back.
Click Play to play back the audio file once.
Outputting Audio Linked to Alarm Detection — Voice alert Menu
69