Common Tab - Setting The Image Memory Function; Capacity Warning - Sony IPELA SNC-DF50N User Manual

Common Tab — Setting the image
memory function
Image memory
To use the image memory function, select On.
For the SNC-DF50
Built-in memory
The current memory space of the built-in memory is
displayed.
For the SNC-DF85/DF80
Selected root directory
Select a memory in which you want to save an image.
The current memory space is displayed on the right.
Built-in memory: Built-in memory of this camera
CF memory card: CF memory card inserted into the
CF card slot of the camera.
Notes
• The image and audio files recorded in the built-in
memory are deleted when the Selected root directory
setting is changed.
• When Selected root directory is set to CF memory
card, "empty" is displayed in the memory space box
and you cannot access the built-in memory.
Overwrite
Select On to overwrite the file or not when there is
insufficient memory space to record the image in the
memory.
On: Overwrite is enabled and old files will be
overwritten in the order of date.
Off: Overwrite is prohibited. No recording will be
performed.

Capacity warning

Select On to send a warning mail to the Administrator
when the memory is full. Select Off if you do not want
to send a warning mail.
Note
When Overwrite is set to On, a warning mail is not sent
to the Administrator.
SMTP server name
Type the name of the SMTP server for sending an e-
mail, using up to 64 characters.
Otherwise type the IP address of the SMTP mail server.
Authentication
Select the authentication required when you send an e-
mail.
Off: Select if no authentication is required when an e-
mail is sent.
On: Select if authentication is required when an e-mail
is sent.
Select one of the authentication methods from the
following and specify the POP server name, User
name and Password as required.
SMTP: Select when SMTP authentication is
required.
POP before SMTP: Select when POP before SMTP
authentication is required.
Note
When you set Authentication to On, be sure to select
either or both SMTP or/and POP before SMTP.
POP server name
This is necessary when POP before SMTP is selected
for Authentication.
Type a POP (receiving mail) server name using up to 64
characters, or type the IP address of the POP server. This
setting is necessary when the SMTP server that sends e-
mails performs authentication using the POP user
account.
User name, Password
Type the user name and the password of the user who
owns the e-mail account. This setting is necessary when
the SMTP server that sends e-mails performs
authentication.
Administrator e-mail address
Type the e-mail address of the recipient of a warning
mail (e-mail address of the camera Administrator),
using up to 64 characters.
OK/Cancel
See "Buttons common to every menu" on page 26.
Recording Images in Memory — Image memory Menu
55