About the extension of a file
A file to be recorded/sent using the image memory
function or the FTP client function has one of the
following three extensions depending on the video mode
setting and the recording/sending settings of the camera.
.m4f: A file of this type is created when Use alarm
buffer is selected in the Alarm recording or Alarm
sending tab and MPEG4 is selected on Codec in the
Alarm buffer menu. The file may include audio data
depending on the microphone setting of the camera.
.jpf: A file of this type is created when Use alarm
buffer is selected in the Alarm recording or Alarm
sending tab and JPEG is selected on Codec in the
Alarm buffer menu. The file may include audio data
depending on the microphone setting of the camera.
.jpg: The file of this type is created when Use alarm
buffer is not selected in the Alarm recording or
Alarm sending tab or when a periodical sending or
periodical recording is performed.
The SNC video player (page 79) allows playing of
".m4f" and ".jpf" files.
58
Downloading Images from the Camera — FTP server Menu
Downloading Images
from the Camera
— FTP server Menu
When you click
the FTP server menu appears. Use this menu to set up for
the FTP server function that finds a specified image and
audio file stored in a built-in memory (about 18 MB) or
in the CF memory card (for the SNC-DF85/DF80 only,
not supplied) inserted in the camera, or downloads a file
from the camera.
FTP server function
To activate the FTP server function, select On.
For the SNC-DF50
Built-in memory
The current memory space of the built-in memory is
displayed.
For the SNC-DF85/DF80
Selected root directory
Select the memory that contains the file you want to
download.
The current memory space is displayed on the right.
Built-in memory: Built-in memory of this camera or
downloads a file from the camera
CF memory card: CF memory card inserted into the
CF card slot of the camera.
Notes
• When Selected root directory is set to CF memory
card in the Common tab of the Image memory menu
for the SNC-DF85/DF80, "empty" is displayed in the
memory space box and you cannot access the built-in
memory.
in the Administrator menu,