Outputting Audio Linked To Alarm Detection; Voice Alert Menu; Voice Alert 1, 2, 3 Tab - Sony ipela SNC-RH124 User Manual

Always: Alarm detection is always effective.
Schedule: You can specify the period during which
alarm detection is effective.
Click Schedule and the menu for the effective period
is displayed. ("Setting the Schedule — Schedule
Menu" on page 88)
OK/Cancel
See "Buttons common to every menu" on page 31.
Outputting Audio Linked
to Alarm Detection

— Voice alert Menu

Click Voice alert in the Administrator menu to display
the Voice alert menu.
Use this menu to set the voice alert function to output
audio from the line output jack of the camera when an
alarm is detected by the sensor input or detection
functions.
You can output audio from a speaker connected to the
camera in synchronization with an alarm event triggered
by the sensor input or the detection functions.
The Voice alert menu consists of 3 tabs: Voice alert 1,
Voice alert 2 and Voice alert 3. You can configure an
individual audio file on each tab.
Note
Before using the voice alert function, you need to save
the audio file to the camera using the SNC audio upload
tool stored in the supplied CD-ROM.
For details on use of the SNC audio upload tool, see
page 116.

Voice alert 1, 2, 3 Tab

File
Displays the name of the audio file saved in the camera.
"Not uploaded" is displayed dimly if no audio file is
saved.
To delete the audio file saved in the camera, click
Delete.
Note
Before deleting an audio file, set Voice alert to Off.
Test
When an audio file is saved in the camera, you can check
it by playing it back.
Click Play to play back the audio file once.
Outputting Audio Linked to Alarm Detection — Voice alert Menu
85