Outputting Audio Linked To Alarm Detection; Voice Alert Menu - Sony IPELA SNC-RX550N User Manual
Sony user guide network camera ipela series
Hide thumbs
Also See for IPELA SNC-RX550N:
- Installation manual (131 pages) ,
- Manual (8 pages) ,
- User manual (111 pages)
Table of Contents
Advertisement
Sensor input 1
Select this option when you link the alarm output to an
external sensor that is connected to sensor input 1 of the
camera I/O port.
Sensor input 2
Select this option when you link the alarm output to an
external sensor that is connected to sensor input 2 of the
camera I/O port.
Object detection
Select this option when you link the alarm output to the
object detection function.
Click Detection, and the Object detection menu is
displayed to allow you to set the object detection
function (page 65).
Note
In the case that the synchronized preset position is
specified in Position at alarm in the Preset position
menu, the alarm event that happens when the camera
moves to the preset position will be invalid.
Alarm duration
Select the duration for which the alarm output is short-
circuited between 1 and 60 sec.
Effective period
This item becomes active when Mode is set to Alarm.
Set the period during which the alarm detection is
effective.
Always: The alarm detection is always effective.
Schedule: You can specify the period during which
alarm detection is effective.
Click Schedule and the menu for the effective period
is displayed. (“Setting the Schedule — Schedule
Menu” on page 63)
OK/Cancel
See “Buttons common to every menu” on page 30.
Outputting Audio Linked to Alarm Detection — Voice alert Menu
Outputting Audio Linked
to Alarm Detection
— Voice alert Menu
Click Voice alert in the Administrator menu to display
the Voice alert menu.
Use this menu to set the voice alert function to output
audio from the line output jack of the camera when an
alarm is detected by the sensor input or object detection
function.
You can output the audio from the speaker connected to
the camera in synchronization with an alarm event
triggered by the sensor input or the object detection
function.
Note
Before using the voice alert function, you need to save
the audio file to the camera using the SNC audio upload
tool stored in the supplied CD-ROM.
For the use of the SNC audio upload tool, see page 75.
Voice alert
To use the voice alert function linked with the sensor
input or the object detection function, select On.
File
Displays whether an audio file is saved in the camera or
not.
Uploaded: The audio file is saved in the camera.
Not uploaded: The audio file is not saved in the camera.
Test
When the audio file is saved in the camera, you can
check it by playing it back.
Click Play to play back the audio file once.
Page 60
Hide quick links:
Advertisement
Table of Contents
