Malfunction Analysis - Gree GPC08AH-K3NNC5A Owner's Manual

If malfunction occur, please check the following before maintenance:
Troubles
The air conditioner doesn't start.
Although it was set to COOL
mode, there is no cool wind.
Although it was set the DRY
mode, there is no cool wind.
The LED displays"
The LED displays"
The LED displays"
The LED displays"

MALFUNCTION ANALYSIS

Possible Causes
The power supply is not connected well.
The power plug is not inserted tightly.
There is the malfunction of power plug
or socket.
The fuse is broken.
1. The room temp. is lower than
the set temp.
2. The evaporator frosts.
1. The evaporator frosts.
1. Low voltage over current
".
protection.
The water tank gets full.
".
Malfunction of Ambient tem-
".
perature sensor.
Malfunction of evaporator tem-
".
perature sensor.
1. Insert the power plug tightly.
2. Replace the power plug or socket.
3. Ask for the maintenance man to
replace the fuse.
1. This is the normal phenomenon.
2. Unit is running in defrosting operation,
it will resume running in original
operation after defrosting.
1. Unit is running in defrosting operation,
it will resume running in original
operation after defrosting.
Cut off power supply, after 10
minutes, turn on the unit, if " "
still be displays, please inform the
maintenance man to maintain.
1. Pour out water in the tank
2. If the malfunction still exists,
please inform the maintenance
man to maintain.
Check if indoor room temperature
sensor is connected properly
Check if the evaporator temperature
is connected properly.
- 16-
Solutions