Dell G15 5510 Service Manual page 64

Table 5. System setup options—Advance menu (continued)
Advance
BIOS Recovery from Hard Drive
BIOS Auto-Recovery
SupportAssist System Resolution
Auto OS Recovery Threshold
SupportAssist OS Recovery
Enable Hybrid Graphics/Advanced Optimus (when
available)
Table 6. System setup options—Security menu
Security
Admin Password
System Password
Admin Password
System Password
Password Change
Absolute®
Absolute® Status
Windows SMM Security Mitigations Table (WSMT)
Firmware TPM
PPI Bypass for Clear Command
64 System setup
Enables the user to recover from certain corrupted BIOS
conditions from a recovery file on the user primary hard drive
or an external USB key.
Enables BIOS to automatically recover BIOS without user
actions.
Default: Disabled
Controls the automatic boot flow for SupportAssist System
Resolution Console and for the Dell operating system
Recovery tool.
Default: 2
Enables or disables the boot flow for the SupportAssist OS
Recovery tool in the even of certain system errors.
Default: Disabled
Enables or disables Hybrid Graphics/Advanced Optimus.
Default: Disabled
Displays if the administrator password is clear or set.
Displays if the system password is clear or set.
Default: Not Set
Allows you to set the administrator password. The
administrator password controls access to the system
setup utility.
Allows you to set the system password. The system
password controls access to the computer at boot.
Allows you to permit or deny system password or HDD
password changes.
Default: Permitted
Enables or disables the BIOS module interface of the
optional Computrace Service from Absolute Software.
Default: Deactivate
Enables or disables SED Block SID Authentication.
Default: Disabled
Enables or disables the Windows SMM Security Mitigations
Table. It allows the system firmware to confirm to the OS
that certain security best practices have been implemented
in the System Management Mode (SMM) software.
Default: Disabled
Enable or disable the firmware TPM.
Default: Enabled
Allows you to control the TPM Physical Presence Interface
(PPI). When enabled, this setting will allow the OS to skip