Replacing Lamps; Problem Solving - Lamona LAM2803 User Instructions And Installation

60cm/90cm stainless steel t-box cooker hood
Table of Contents

Advertisement

Replacing lamps

The lamps on this model are
and replacement should be carried out by an
authorised service agent.
which will give many years of reliable service.
the service number.
Only use
replacement
lamps of type:

5 - Problem solving

PROBLEM SOLVING
Symptoms
Light functions but
fan does not.
Lamps fail to
operate.
Motor is on but fan
usual.
The cooker hood
works normally but
smells linger.
Product does not
operate.
If you cannot eliminate the problem
after following the instructions in this section,
consult your local Howdens dealer or an
Authorised Service Agent. Never try to repair
a non functional product yourself.
Metal surfaces of the cooker hood and
condensation
When cooking with pans using a large water
content, large quantities of vapour and
steam can be produced very quickly. This
steam may condense onto the cold metallic
surfaces of the cooker hood and even the
16
LED
Rectangular LED lamp 1 x 2 W
AC 220-240V
Possible cause
• Motor temperature has exceeded and the
thermal fuse has tripped.
• Lamps internal fault.
• Lamp has passed its usable life.
obstructed.
• The mains fuse may be defective or has
tripped.
• Product is not connected properly.
used during operation of the cooker hood.
They should not be left on permanently and
used as a main lighting source. The cooker
hood is for domestic use only.
splash back area if tiled, glazed etc (This
is not a fault with either the hob or cooker
this condensation on any particular surface
will depend on many factors including the
ambient temperature in the kitchen, the
related ambient temperature of the metal
surfaces, the general ventilation within the
kitchen, the type of food being cooked and
the duration. Using lids on pans can help
reduce the amount of steam being released
and subsequent condensation.
www.howdens.com
Solutions
• Switch off the cooker hood and allow it to
cool down and the fuse will auto reset.
replace as required.
• Call an authorised service agent.
mild detergent.
mild detergent.
• Check fuses in the fuse box. If necessary,
replace or reset them.
• Check all power connections.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lam2804

Table of Contents