3.4.9. Optional Braking Chopper
The optional braking chopper uses resistor braking to provide motor braking and shorter
deceleration times, eg, for:
–
Reduction of coasting down time, eg, for conveyor belts, fans, and pumps
–
Emergency stops
The braking chopper cabinet connects to the right side of the drive as well as to the braking
resistors, which are external to the ACS1000A and not part of the product scope.
Fig. 14. ACS1000A with braking chopper (1)
The braking chopper is controlled and monitored by the ACS1000A.
1
Key:
(1)
Rectifier
(2)
Braking chopping
(3)
Inverter
(4)
Braking resistor
Fig. 15. Principle diagram
PRODUCT
ACS1000A
2
VC1
C1
4
Rb
C2
VCs2
VC2
DOCUMENT KIND
User manual
POWER ELECTRONICS AND CABINET FEATURES
1
3
DOCUMENT ID.
3BHS213401 E01
REV.
LANG.
PAGE
L
en
38/164