6.
Loosen and remove the hardware that attaches the Drive Belt Cover
to the Drive Belt Inside. Carefully remove the Drive Belt Cover and set it
safely aside for reassembly.
7.
brackets (E) on the Frame. Record the number of threads showing on
the Tensioner eyebolt on each side of the Tensioner support (E1) on the
bracket.
8.
Using a 10mm wrench, loosen the outer Flywheel Retainer Nut (F)
on both sides of the machine. Loosen the outer Flywheel Retainer Nut
until there is a visible slack in the Drive Belt. This will ease the removal of
the Drive Belt (G) from the Drive (Crank) Pulley (H).
9.
To remove the Drive Belt (G) from the Drive Pulley (H), slightly pull
the Drive Belt outward while safely rolling the Drive Pulley. The Drive Belt
will come off the Drive Pulley. Set the Drive Belt safely aside.
you turn the Drive Pulley.
X5
E
G
66
D
E1
F
D
I
K
X2
E