Nautilus Schwinn IC7 Service Manual page 25

Disconnect the data cable from the console before you service this machine.
Note: Your machine may not match the image. For reference only.
1. Be sure the Console Data Cable is disconnected from the Data Cable
in the frame. Loosen and remove the screws from the back of the console.
Remove the Console from the Console Bracket, and set it safely aside for
reassembly.
NOTICE: Do not crimp the cable.
X4
#2
X3
2. Loosen and remove the hardware that attaches the Water Bottle
Holder, and set it safely aside for reassembly. Remove the Water Bottle
Holder, and set it safely aside for reassembly.
*
25