Table of Contents
Advertisement
R
3.
Start the Pedal by hand. If you feel resistance and the Pedal does
not turn smoothly into the Crank Arm, make sure that the threads are
aligned correctly. Be sure that the Pedal is going on straight into the
Crank Arm. If the Pedal is not in-line with the opening, remove the Pedal
and start again.
4.
With the Pedal started by several hand turns into the Crank Arm, fully
tighten it with the Pedal Wrench.
5.
Pedal Wrench.
6.
Repeat with the other Pedal.
Note:
result in damage to the machine and/or injury to the user. Never operate this machine with loose Pedals.
7.
Final Inspection
Inspect your machine to ensure that all hardware is tight and components are properly assembled.
Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Owner's
Manual.
L
21
Advertisement
Table of Contents
