Table of Contents
Advertisement
5. Using a #2 Phillips screwdriver, loosen and remove the hardware
that attaches the Brake Cover to the Main Frame. Set the hardware safely
aside for reassembly.
NOTICE: Hold the Brake Cover so that it does not fall.
6.
Carefully remove the Brake Cover and set it safely aside for
reassembly.
NOTICE: Do not crimp the cable.
7. Loosen the Resistance Knob (D) to the minimum resistance setting.
8.
Using a 10mm open end wrench, loosen and remove the hardware
(E1) that attaches the Brake Assembly (E) to the Frame Mount (F).
Remove the Brake Assembly and set it safely aside.
E1
51
D
E
F
Advertisement
Table of Contents
