Table of Contents
Advertisement
3. Loosen and remove the Adjustment Handle (A) that attaches the
aside for reassembly.
4. Loosen and pull the Adjustment Handle (B) that holds the Handlebar
Post in position in the Main Frame.
5. Remove the Handlebar Post from the Main Frame.
6. Discard the old part.
7. Installation is the reverse procedure.
NOTICE: Make sure that the Adjustment Knob engages the holes in
the Handlebar Post. Do not crimp the cable.
8. Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully
assembled and inspected for correct perfor
mance in accordance with the Owner's Manual.
A
26
B
Advertisement
Table of Contents
