5.
Remove the hardware that attaches the Drive Belt Cover to the Drive
Belt Inside, and set it safely aside for reassembly. Carefully remove the
Drive Belt Cover and set it safely aside for reassembly.
6.
Installation is the reverse procedure. Installation does not
require the use of the crank puller. Be sure the Crank Arms are
connected at 180° from each other.
7.
Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully
assembled and inspected for correct
performance in accordance with the Owner's
Manual.
X5
38
X2