ABB GPS2436 User Manual page 45

Figure 9-5: Controller Front Panel Displays
Figure 9-6: Detailed Controller Front Panel Display – L51/52
LED
Depending on the LCD option utilized, the LCD assemblies contain two rows of LEDs at the right side
of the interface board or two columns of LEDs at the left side of the interface board as seen in figure
4-5. The segregated sections of LEDs provide an indication of the alarm source (rectifier, battery,
distribution, communication, controller, remote modules) and the severity (Critical, Major, Minor,
Nominal) of the various alarms. Operation of the status LEDs can be reconfigured via the local or
remote controller interfaces.
Page 45
© Copyright 2023 ABB. All rights reserved. GPS2436_MAN Rev. 1.3