ABB GPS2436 User Manual page 57

Minimum Configuration
Front Panel
The Millennium II controller's primary user interface is the front panel, which includes a backlit LCD, and
an array of pushbutton controls. SW202-8 must be set to ENABLED for changes to be made from the
front panel. This section covers only the basic operations that must be performed so that the controller
is minimally configured. For more advanced operations, please see the User's Guide for Millennium II
Controller – Advanced Features.
Configuration Attribute to
Step
Change
1. DATE/TIME
Format
Month
Day
Year
NOTE:
2. TIME
Format
Time
Daylight
Page 57
© Copyright 2023 ABB. All rights reserved.
Menu Path/Action
This field allows you to select one of the following date
formats: MM/DD/YY, DD/MM/YY,
YYYY, DD/MM/YYYY, YYYY/MM/DD. Use the <+> or <-> key to
select the desired format and press <ENTER> to save the
change.
Use this field to change the month; the possible value is
from 1 to 12.
Use this field to change the day of the month; the possible
value is from 1 to 31.
Use this field to change the year; the possible value is from
1992 and up.
Please note that the system will validate the entries before
the system date is modified.
This field allows you to select one of the following time display
formats: 12 or 24 hour. Use the <+> or <-> key to select the
desired format and press <ENTER> to save the change.
Allows you to change/set the time.
Enables or Disables Daylight Savings.
GPS2436_MAN
YY/MM/DD, MM/DD/
Customer Value
Rev. 1.3