Table of Contents
Advertisement
BEFORE FIRST USE
Unpacking
Unpack the ice cube maker, then check to ensure that all the components are included. If
components are missing, contact help.Kogan.com for assistance.
Cleaning
It is strongly recommended to clean the ice cube maker before first use.
•
Remove the ice basket.
•
Open the drain plug. Clean the interior with a soft cloth soaked with warm water and
vinegar. Rinse with fresh water and drain.
•
Wash the ice basket and ice scoop in warm soapy water. Rinse and dry.
•
Clean the exterior of the ice maker with a soft damp cloth. Use a mild dishwashing
soap if necessary.
Placement
Place the ice cube maker on a stable, level surface with at least a 25cm clearance from
heat sources (for example, ovens, heaters, and corrosive gases).
Before first use, wait for at least two hours to allow the fluids in the compressor to settle.
For subsequent uses, wait for at least 30 minutes to allow the fluids in the compressor to
settle after the ice cube maker is moved or transported.
Note:
•
Do not turn the ice cube maker upside down.
•
During winter, allow the appliance a few hours to warm to room temperature
before plugging in.
Advertisement
Table of Contents
