Packing List - EverFocus EMV400 FHD-N Quick Installation Manual

Main Monitor
7
(VGA)
D-Sub
8
Connector

1.3 Packing List

• Mobile DVR x 1
• HDD Lock Key x 2 (with 4 screws for screwing HDD. See 2.2 Hard Disk Installation)
• Mounting Screws x 4 (with 8 spacers. See 2.1 Mounting)
• IR Remote Control (with two AAA batteries. See Note 3) x 1
• Power Harness Cable x 1
• Video Cable x 1 (EMV400 FHD-N); x2 (EMV800 FHD-N Lite) (see 2.4 Audio Cable / Video
Cable / Power-Out Cable)
• Audio Cable x 1
• D-Sub Cable x 1
• Power-Out Cable x 1
• Quick Installation Guide x 1
Note:
1. Equipment configurations and supplied accessories vary by country. Please consult your
local EverFocus office or agents for more information. Please also keep the shipping carton
for possible future use.
2. Contact the shipper if any items appear to have been damaged in the shipping process.
3. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries
according to the instructions.
a. Use only two AAA dry cell batteries.
b. Do not dispose of the batteries in a fire as it may explode.
By default, this port is set to a Main monitor output. Connects to a Main
monitor using a VGA cable.
Note: You can optionally switch this port from Main monitor to Call
monitor. Please refer to 2.6 Monitor Connection in the User's Manual.
D-Sub connector for connecting to the Alarm I/O, RS-232 (CAN bus) or
RS-485 devices (such as analog PTZ cameras). For details, please refer to
2.5.4 D-Sub Cable in the User's Manual.
3