11. Install the
back
cover.
12. Install the stand.
13. Follow the procedure in
Power-button and I/O board
Removing the power-button and I/O board
Prerequisites
1. Follow the procedure in
2. Remove the stand.
3. Remove the
back
cover.
4. Remove the
system-board
5. Remove the
I/O
cover.
6. Remove the
bottom
cover.
7. Remove the
I/O
bracket.
About this task
The following image(s) indicate the location of the power-button and I/O board and provides a visual representation of the
removal procedure.
After working inside your
Before working inside your
shield.
Removal and installation procedures for High Performance processors
computer.
computer.
97