Dell W32C Owner's Manual page 104

Steps
To install the display-assembly base, perform all the post-requisite procedures.
Next steps
1. Install the power-button and I/O
2. Install the audio board.
3. Install the system board.
NOTE: The system board can be installed with the memory, solid-state drive(s), coin-cell battery, and processor
pre-attached.
4. Install the heat sink.
5. Install the speakers.
6. Install the I/O bracket.
7. Install the power-supply
8. Install the power-supply
9. Install the fan.
10. Install the retractable-camera
11. Install the bottom cover.
12. Install the I/O cover.
13. Install the wireless card.
14. Install the system-board
15. Install the back cover.
16. Install the stand.
17. Follow the procedure in
104 Removal and installation procedures for High Performance processors
board.
fan.
unit.
assembly.
shield.
After working inside your computer.