I/O Cover - Dell W32C Owner's Manual

Steps
With the positive-side (+) facing up, insert the coin-cell battery into the battery socket on the system board and snap the
battery into place.
Next steps
1. Install the system-board
2. Install the back cover.
3. Install the stand.
4. Follow the procedure in

I/O cover

Removing the I/O cover
Prerequisites
1. Follow the procedure in
2. Remove the stand.
3. Remove the back cover.
4. Remove the system-board
About this task
The following image(s) indicate the location of the I/O cover and provides a visual representation of the removal procedure.
shield.
After working inside your
Before working inside your
shield.
Removal and installation procedures for High Performance processors
computer.
computer.
65