Bottom Cover - Dell W32C Owner's Manual

Steps
1. Place and align the I/O cover with the display-assembly base.
2. Align the I/O slots on the I/O cover with the I/O ports and the screw holes on the I/O cover with the screw holes on the
display-assembly base.
3. Replace the two screws (M3x5) that secure the I/O cover to the display-assembly base.
Next steps
1. Install the system-board
2. Install the back cover.
3. Install the stand.
4. Follow the procedure in

Bottom cover

Removing the bottom cover
Prerequisites
1. Follow the procedure in
2. Remove the stand.
3. Remove the back cover.
4. Remove the system-board
5. Remove the I/O cover.
About this task
The following image(s) indicate the location of the bottom cover and provides a visual representation of the removal procedure.
shield.
After working inside your
Before working inside your
shield.
Removal and installation procedures for High Performance processors
computer.
computer.
67