Motorola CPEi 825 Series Regulatory Manual
  1. Manuals
  2. Brands
  3. Motorola Manuals
  4. Network Hardware
  5. CPEi 825 Series
  6. Regulatory manual
Motorola CPEi 825 Series Regulatory Manual

Motorola CPEi 825 Series Regulatory Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office.
All other product or service names are the property of their respective owners.
© 2010 Motorola, Inc.
CPEi 800
CPEi 825
Series
Regulatory Guide
Regulatory Guide

Advertisement

Table of Contents
loading

Related Manuals for Motorola CPEi 825 Series

Summary of Contents for Motorola CPEi 825 Series

  • Page 1 CPEi 800 CPEi 825 Series Regulatory Guide Regulatory Guide MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. © 2010 Motorola, Inc.

  • Page 2: Table Of Contents

    Table Contents Contents Chapter 1: Desktop CPEi 800/825 User Guide Overview ..............1-1 Powerful Features in a Single Unit .
  • Page 3 About Tab ..............4-7 Chapter 5: Configuring TCP/IP Configuring TCP/IP in Windows 2000 .

  • Page 4: Chapter 1: Desktop Cpei 800/825 User Guide

    Chapter 1: Desktop CPEi 800/825 User Guide Overview Thank you for purchasing the Motorola CPE Indoor (CPEi) 800/825 desktop device. The Desktop CPEi allows you to connect to the wireless world easily and seamlessly without complicated installation and setup procedures. In addition, it offers you the ability to make Voice over Internet Protocol (VoIP) calls.

  • Page 5: Front Of The Cpe

    Desktop CPEi 800/825 User Guide Front of the CPE The front of the CPE unit contains LED Link/Activity indicators. The LEDs provide the status of the unit and signal strength indicators for easy adjustment during setup. Table 1-1 LED Indicator Interface Status Signal Strength Full WiMAX Signal Strength is detected...

  • Page 6: Operating Information

    Desktop CPEi 800/825 User Guide Figure 1-2: CPE Ports and Connections Table 1-2 Port Descriptions Port Port Description Ethernet Ethernet Port Power AC Power Connector Reset Hardware Reset Button (A paperclip is recommended for accessing this button). Phone Line 1 RJ-11 port for use with VoIP.
  • Page 7 Desktop CPEi 800/825 User Guide...

  • Page 8: Chapter 2: Installation

    Installation Chapter 2: Installation Overview To install the Desktop CPEi 800/825 Series, review the following sections: • Before You Begin • Easy Setup Before you Begin Before you begin installation, check that you have received the following items with your Desktop CPEi 800/825: Table 2-1 In the box with your CPE, you should have Item Description...

  • Page 9: Advanced Setup

    Enter the IP address: http://192.168.15.1 into Address field in order to gain access to your CPE. If you cannot access the CPE, refer to the chapter titled: Configuring TCP/IP for more information. 3. The Welcome to Motorola WiMAX CPE screen is displayed and prompts you for a password.

  • Page 10: Setup Wizard And Authentication

    • Re-type your new password in the Confirm New Login Password box. • Click Next. If you forget your password, you can reset it back to the default (motorola) password. To reset the password, press and hold the reset button on the back of your CPE for 5 or more seconds.
  • Page 11 Installation • Check the box that is called “Auto Adjust for Daylight Savings Time” if you live in a region that observes Daylight Savings Time. This box is checked by default. • Click the Next button. Step 3 - WiMAX Security The WiMAX Security tab contains your authentication method.
  • Page 12 Installation Figure 2-2: Status Screen Restart Button Figure 2-3: Restart Button...
  • Page 13 Installation...

  • Page 14: Chapter 3: Basic Configuration

    Basic Configuration Chapter 3: Basic Configuration Once the CPE setup has been completed, you can log in to your CPE from any computer on your home network. To log in type the device name in the address bar on your computer. The default device name is mywimax. This section describes the PERSONALIZE, INTERNET, and STATUS Menus that are available.

  • Page 15: Password Tab

    Basic Configuration Password Tab The password tab allows you to enable/disable password protection. You can also change your password here. Be sure to click the Apply button when finished Table 3-1 Password Tab Field or Button Description Enable Login Password Protection Checking this box requires login password protection.

  • Page 16: Restore Factory Settings Tab

    Basic Configuration Restore Factory Settings Tab The Restore Factory Settings Tab resets your CPE to the manufacturers default settings. Be sure to click the Apply button if you are sure that you want to reset factory settings. Table 3-4 Restore Factory Settings Tab Field or Button Description Restore Factory Settings...

  • Page 17: Wimax Security Tab

    WiMAX Security Tab The WiMAX Security tab contains your authentication method. Check with your service provider to determine a user name and password are required for authentication purposes. Table 3-5 WiMAX Security Tab Field or Button Description Authentication Method Drop down box allows you to select either EAP-TLS (default) or EAP-TTLS/MS- CHAPv2.

  • Page 18: Dynamic Dns Tab

    Basic Configuration Table 3-6 Firewall Tab Field or Button Description Enable ping from Internet Enables the CPE to respond to a ping from the Internet. This option would be enabled to allow testing only. Do not leave this enabled. Be sure to click the Apply button once you are finished. Dynamic DNS Tab Dynamic Domain Name Service (DDNS) allows a user with a non-static IP address to keep their domain name associated with an ever changing IP address.

  • Page 19: Telephony Menu

    Basic Configuration Figure 3-3: Status Menu Network Tab The Network tab provides any status associated with your WiMAX Wireless Broadband connection. Telephony Tab The Telephony tab provides any status associated with your telephony connection. Telephony Menu The telephony menu allows you to manage your Voice over Internet Protocol (VoIP) services.
  • Page 20 Basic Configuration Figure 3-4: Telephony Menu Account Tab Please consult with your service provider for these settings. The Account Tab contains the following settings: Table 3-8 Account Tab Field or Button Description Line 1 User Name If Line 1 is an active VoIP, enter the User Name as provided by your service provider.
  • Page 21 Ring Tone Tab The Ring Tone tab allows you to customize ring tones for your telephone(s). NOTE You need a phone connected to your CPE to hear ring tones. Table 3-9 Ring Tone Tab Field or Button Description Default Line 1 Ring Type Use the drop-down box to select a ring tone for Line 1.
  • Page 22 Basic Configuration Table 3-10 Caller ID Tab Field or Button Description Enable Line 2 Permanent Anonymous If Line 2 is your active telephone port, Outgoing Call check this box if you would like to permanently block your telephone number from appearing on others’ Caller ID. The default is unchecked.
  • Page 23 Basic Configuration Table 3-11 Call Forwarding Tab Field or Button Description Enable Line 2 Forwarding on No Answer Check this box to forward calls received on Line 2 if there is no answer. This function is not available if “Enable Line 2 Basic Forwarding”...
  • Page 24 Basic Configuration Special Number Tab The Special Number tab provides a list of special dialing numbers for your VoIP Phone Service. The Special Number Tab contains the following: Table 3-13 Special Number Tab Field or Button Description Service Provider Contact Number Use this number to contact customer service for your service provider.
  • Page 25 Basic Configuration Table 3-13 Special Number Tab Field or Button Description Automatic Callback Activate Dial this number to hear the most recent call you missed and to return the call. If the number is busy, you can hang up. When the number is available, your phone will ring.

  • Page 26: Chapter 4: Advanced Configuration

    Advanced Configuration Chapter 4: Advanced Configuration The Advanced Configuration section describes the Port Forwarding, Local Address, and Control Panel menus. Port Forwarding Menu Port forwarding enables you to direct incoming traffic to specific LAN hosts (computers on your network) based on the protocol and port number. It is used to play Internet games or provide local services (such as web hosting) for a LAN group.

  • Page 27: Forwarding Tab

    Advanced Configuration Forwarding Tab Click the ADD button to create additional Port Forwarding rules. The Forwarding tab contains the following selections: Table 4-2 Forwarding Tab Field or Button Description Select Select a box when you want to delete the specific row. Protocol Select TCP (Transmission Control Protocol) or UDP (User Datagram...

  • Page 28: Dhcp Server Tab

    Advanced Configuration Figure 4-2: Local Address Menu DHCP Server Tab The DHCP Server tab enables Dynamic Host Configuration Protocol (DHCP) server functionality on the LAN, allowing the router to dynamically assign lease IP addresses to clients that connect to it from the local network. The DHCP Server Tab contains the following selections: Table 4-3 DHCP Server Tab Field or Button...

  • Page 29: Lease Status Tab

    Advanced Configuration Table 4-3 DHCP Server Tab Field or Button Description DHCP Ending IP Address Sets the final IP address assigned by the DHCP server. If the DHCP server runs out of DHCP addresses, users cannot access network resources. If this happens, increase the Ending IP or reduce the Lease Time.

  • Page 30: Control Panel

    Advanced Configuration Table 4-5 Lease Reservation Tab Field or Button Description Select Select this box if you want to delete an established lease reservation. Be sure to click the Delete button once you have selected the exception to be deleted. Client Host Name Enter the client host name.

  • Page 31: Software Tab

    Advanced Configuration Figure 4-3: Control Panel Menu Software Tab The Software tab manages the software on your CPE device. It is also where you can upgrade device software. Use the BROWSE button to browse your computer for additional software packages. Once you have located the software package/update you would like to add to your device, click the Upgrade button.

  • Page 32: About Tab

    Advanced Configuration Table 4-6 System Tab Field or Button Description Language Used in User Interface Select the desired language for the user interface. The default language is English. Enable WiMAX Radio Interface Check this box to enable the WiMAX Radio Interface. Enable LED Check this box to enable the LEDs on the front of your CPE device.
  • Page 33 Advanced Configuration...

  • Page 34: Chapter 5: Configuring Tcp/Ip

    Configuring TCP/IP Chapter 5: Configuring TCP/IP This section contains two examples of configuring TCP/IP in a Windows environment. Most computers already have the TCP/IP configuration enabled. Use the following procedures to verify that the configuration is set up. Configure all client computers on your network for TCP/IP (the protocol that controls communication among computers).
  • Page 35 Configuring TCP/IP Figure 5-2: Network and Dial-up Connections In the steps that follow, a connection number like 1, 2, 3, etc., is a reference that is displayed on computers with multiple network interfaces. Computers with only one network interface may only see the label: Local Area Connection. 4.
  • Page 36 Configuring TCP/IP Figure 5-4: Properties 6. If Internet Protocol (TCP/IP) is in the list of components, TCP/IP is installed. You can skip to Step 10. Figure 5-5: Select Network Connection Type If Internet Protocol (TCP/IP) is not in the list, click Install. The Select Network Component Type window is displayed: 7.
  • Page 37 Configuring TCP/IP Figure 5-6: Select Network Protocol NOTE You might have to use the scroll bar to locate the Internet Protocol (TCP/ IP) setting 8. Click Internet Protocol (TCP/IP). 9. Click OK. The Local Area Connection number Properties window is re-displayed. 10.

  • Page 38: Configuring Tcp/Ip In Windows Xp

    Configuring TCP/IP 13. Click OK to accept the TCP/IP settings. 14. Click Close to close the Local Area Connection number Properties window. 15. Click OK. 16. If prompted to restart the computer and click OK again. Configuring TCP/IP in Windows XP 1.
  • Page 39 Configuring TCP/IP Figure 5-10: Network and Internet Connections 4. Click Network Connections. Skip to Step 6. 5. If a classic view like Figure 5-11 is displayed, double-click Network Connections to display the LAN or High-speed Internet connections. Figure 5-11: Control Panel Classic View 6.
  • Page 40 Configuring TCP/IP Figure 5-12: Network Connections 7. Select Properties from the pop-up menu to display the Local Area Connection Properties window: Figure 5-13: Local Area Connection Properties 8. On the Local Area Connection Properties window, select Internet Protocol (TCP/ IP) if it is not selected. 9.
  • Page 41 Configuring TCP/IP Figure 5-14: Internet Protocol (TCP/IP) Properties 10. Be sure Obtain IP address automatically and Obtain DNS server address automatically are selected. 11. Click OK to close the TCP/IP Properties window.

  • Page 42: Chapter 6: Troubleshooting

    Troubleshooting Chapter 6: Troubleshooting Power • Check that the AC power adapter is properly plugged into the electrical outlet and into the Desktop CPE. • Check that the electrical outlet is working. A Computer Cannot Log On to the CPE Check that the Ethernet cable is properly connected to the Desktop CPE unit and the computer.
  • Page 43 Troubleshooting...
  • Page 44 300 GHz” and “Attachment to Resolution #303 from July 2, 2002” The software described in this document is the property of Motorola, Inc and its licensors. It is furnished by express license agreement only and may be used only in accordance with the terms of RF Exposure Compliance and Guidelines Operating Instructions such an agreement.
  • Page 45 20 cm between the radiator and you. Substances (EU RoHS) directive. Please do not dispose of Motorola Networks equipment in landfill sites. In the EU, Motorola Networks in conjunction with a recycling partner will ensure that equipment is collected and recycled according to the requirements of EU environmental law.

This manual is also suitable for:

Cpei 800 series

Table of Contents