Connecting Tv To Other Equipment - Toshiba 19DV615Y Owner's Manual

Connecting TV to other equipment

1
Connecting aerials and other devices to your TV
Connect the cable TV coaxial cable directly to the aerial input jack on the rear of the TV.
Satellite
antenna
Decoder
Satellite receiver
Caution:
Before connecting:
• Make sure to disconnect the appliance from the power supply in order to avoid any potential damage from occurring.
• Make sure to establish the required connection.
• Make sure that connections are properly and correctly attached before connecting the appliances to the power supply.
2
Connecting an audio system
If you have a surround sound amplifier/decoder with a coaxial digital input, you can connect the Coaxial Digital Audio
Output to it, using a suitable coaxial digital lead. This connection carries the audio signal from the set's Digital channels
only.
Notes:
• The Bass/Treble/Balance adjustments only function with the sound from the TV speakers - it does not affect the audio
output sockets.
• After connecting a Dolby Digital decoder please select in the DVD menu the Dolby Digital (DD) sound track option.
• Several DVDs may be pre-recorded on both sides however only one side contains the Dolby Digital sound track. Please
insert the correct DVD side.
• When a DTS sound track is played the integrated loudspeakers are mute. The DTS sound can only be played digitally
using the digital outlet. DTS decoder is necessary for hearing.
• Digital audio output is active only when receiving DVB-T, not when receiving analog cable TV broadcasting.
54
Antenna
Audio/video cable
Video recorder
(All illustrated cables are not supplied)
TV
(Back side view)
Coaxial digital lead
(not supplied)
TV (Back side view)
AV (Video, Component input
Audio L/R)
Component cable
DVD player
Surround sound
amplifier system
Tuner