Nespresso PIXIE Manual page 24

EN
TROUBLESHOOTING
No light indicator
No coffee,
no water
Coffee comes out
very slowly
Coffee is not hot
enough
Error mode:
The 2 lights flash
fast together every
3 seconds
In case of intensive use (more than 10 coffees in one go,
without stop), the machine can go into overheating mode.
Wait a maximum of 10 minutes before using it again. Both
buttons will flash slowly, do not unplug the machine. This is
a normal step after a rest period to protect the pump.
• Check the power outlet, plug, voltage, and
fuse. In case of problems, call Nespresso.
• First use: fill water tank with water
(max. 55° C / 130° F) and run through
machine according to instructions
on page 11.
• Water tank is empty. Fill water tank.
• Descale if necessary; see Descaling section
on page 18.
• Flow speed depends on the coffee variety.
• Descale if necessary; see Descaling section
on page 18.
• Descale if necessary; see Descaling section
on page 18.
• Unplug and replug the machine. If the
problem persist, call Nespresso.
24