Troubleshooting - Silvercrest KH 2001 Operating Instructions Manual

Troubleshooting

If the malfunction cannot be corrected with the following suggestions, or if you have determined that the
malfunction has other causes, please make contact with our Service Centre.
Problem
• The appliance does not func-
tion.
• The control lamp integrated
into the On/Off switch 0
does not glow.
• The appliance has switched
itself off during use and does
not allow itself to be switched
back on.
• The green control lamp does
not glow.
Cause
• The appliance is not connected
with a mains power socket.
• The On/Off switch 0 has not
been activated.
• The heat protection function
has been activated.
• The heat protection function
has been activated.
• The programmed temperature
for the cooking oil/fat has not
been reached.
- 47 -
Solution
• Connect the appliance with
a mains power socket.
• Press the On/Off switch 0.
• Allow the appliance to cool
down. Press the reset button e
on the rear of the control and
heating element 5.
1. Remove the plug and allow the
appliance to cool down.
2. Press the reset button e on the
rear of the control and heating
element 5.
• Wait a few minutes until the
required temperature has been
reached.